SZ1005K182TF

Overview

The SZ1005K182TF is a single-line ferrite bead manufactured by Shenzhen Sunlord Electronics Co., Ltd. It features a 0402 (1005 metric) surface-mount package with dimensions of 1.00mm x 0.50mm and a maximum height of 0.65mm. The component provides an impedance of 1.8 kOhms at 100 MHz, with a maximum DC resistance of 2.2 Ohms and a rated current of 200mA. It operates within a temperature range of -55°C to 125°C.

Feature Summary

• Provides high impedance for noise suppression in the 100 MHz frequency range
• Designed for compact surface-mount applications using standard 0402 footprints
• Capable of handling continuous currents up to 200mA

Applications

• High-speed data line filtering
• Power supply noise attenuation
• RF circuit interference suppression

Procurement Notes

Verify the manufacturer part number SZ1005K182TF against official Sunlord documentation to ensure authenticity. Confirm that the required impedance value of 1.8 kOhms at 100 MHz meets specific circuit design requirements. Ensure the 200mA current rating is sufficient for the target application to prevent saturation or excessive heating during operation.

Selection Notes

Select this component when space constraints require a 0402 footprint for ferrite beads. It is suitable for designs needing moderate current handling of 200mA alongside significant high-frequency attenuation. Compare the 2.2 Ohm DC resistance against power loss tolerances in the signal path to ensure signal integrity is maintained without undue voltage drop.

Part Context

This component belongs to the general category of passive electronic filters, specifically multi-layer chip ferrite beads. It is produced by Shenzhen Sunlord Electronics Co., Ltd., a manufacturer specializing in magnetic components. The part serves as a passive element to suppress electromagnetic interference in electronic circuits.

Replacement Considerations

The HZ1005K182TF from the same manufacturer offers identical electrical specifications and physical dimensions. Verify pin compatibility and mounting orientation before substituting.