T10GC1-25.000MHZ-T

Crystals Overview

The MMD T10GC1-25.000MHZ-T is a surface-mount passive crystal operating at a nominal frequency of 25.000 MHz. It features a 4-SMD, No Lead package with dimensions of 3.45mm x 2.75mm. The component has a load capacitance of 10pF and a frequency tolerance of ±10ppm. Initial frequency stability is specified at ±30ppm over the operating temperature range. The equivalent series resistance (ESR) is rated at 100 Ohms maximum.

Crystals Feature Summary

• Compact 4-SMD no-lead ceramic package designed for space-constrained PCB layouts.

Crystals Applications

• Microcontroller clock generation
• Bluetooth module timing
• Low-power IoT sensor interfaces

Crystals Procurement Notes

Verify the specific datasheet version for the T10GC1 series to confirm exact ESR and stability limits, as these can vary by frequency within the same package family. Ensure compatibility with standard SMT reflow profiles. Confirm that the 10pF load capacitance matches the host circuit design requirements to prevent frequency deviation during operation.

Crystals Selection Notes

Select this component when a 25MHz reference is required in a compact form factor. The 100 Ohm ESR rating supports standard MCU oscillator circuits without requiring additional impedance matching components. Verify that the ±30ppm initial stability meets the system's synchronization requirements before finalizing the bill of materials.

Crystals Part Context

This part belongs to MMD's general-purpose SMD crystal lineup. It utilizes AT-cut quartz technology for stable oscillation. The 4-SMD no-lead construction allows for automated assembly, reducing manufacturing complexity compared to through-hole alternatives while maintaining reliable performance in consumer electronics applications.

Crystals Replacement Considerations

Direct substitutes include other 25MHz crystals with identical 3.45x2.75mm footprint, 10pF load capacitance, and ≤100Ω ESR. Cross-reference pinout and mounting pad dimensions to ensure mechanical compatibility. Verify that alternative parts meet the same ±30ppm stability specification for the target application environment.