TE0600-03-83I11-A

Overview

The TE0600-03-83I11-A is an industrial-grade GigaBee micromodule featuring a Xilinx Spartan-6 LX FPGA. It integrates two 16-bit wide DDR3 SDRAM banks (128 MB or 512 MB), 16 MB SPI Flash, and a Marvell Alaska Ethernet PHY supporting 10/100/1000 Mbps. The module operates on a 3.3 V supply with onboard switching regulators providing 1.2 V and 1.5 V rails. It utilizes two 100-pin hermaphroditic B2B connectors for I/O expansion, offering up to 52 differential and 109 single-ended pins.

Feature Summary

• Industrial-grade Xilinx Spartan-6 LX FPGA
• Dual 16-bit DDR3 SDRAM banks (128 MB or 512 MB)
• Marvell Alaska Gigabit Ethernet PHY (10/100/1000 Mbps)
• 16 MB SPI Flash memory with SHA-1 protected 1-Wire EEPROM

Applications

• Industrial automation control systems
• Embedded data acquisition modules
• Network communication gateways
• High-speed signal processing applications

Procurement Notes

Verify the specific FPGA variant (LX45, LX100, or LX150) and DDR3 capacity (128 MB or 512 MB) required for the design. Confirm assembly options such as watchdog timer configuration and oscillator presence. Ensure carrier board compatibility with the 4x5 cm form factor and Samtec Razor Beam connector mating heights.

Selection Notes

Select based on FPGA logic resource requirements and memory bandwidth needs. The LX100 and LX150 variants support eFUSE bit-stream encryption. Verify power supply constraints, as the module requires a nominal 3.3 V input and provides regulated 1.2 V and 1.5 V rails for FPGA and peripherals.

Part Context

This module belongs to the Trenz Electronic GigaBee XC6SLX series, designed for compact embedded applications. It is part of a modular ecosystem that includes compatible baseboards like the TE0603. The series emphasizes high-density I/O in a small footprint suitable for space-constrained industrial environments.

Replacement Considerations

No direct public substitutes are documented. Consider other GigaBee series modules from Trenz Electronic if different FPGA families (e.g., Artix-7, Kintex-7) are required, noting differences in pinout and power architecture.