TE0713-02-82C46-A

Microcontrollers, Microprocessor, FPGA Modules Overview

The Trenz Electronic TE0713-02-82C46-A is an industrial-grade System-on-Module (SoM) based on the Xilinx Artix-7 XC7A100T FPGA. It integrates 1 GByte of DDR3L SDRAM, a 32 MByte Quad SPI Flash memory, and a USB 3.0 to FIFO bridge. The module features a rugged design with high shock and vibration resistance, suitable for demanding environments. It utilizes Samtec Razor Beam connectors for board-to-board interfacing, providing 152 FPGA I/Os. Power management includes on-board DC-DC converters and a system controller CPLD for power sequencing.

Microcontrollers, Microprocessor, FPGA Modules Feature Summary

• Xilinx Artix-7 XC7A100T FPGA with 4 GTP transceiver lanes
• 1 GByte DDR3L SDRAM and 32 MByte QSPI Flash memory
• FTDI FT600Q USB 3.0 to FIFO interface bridge
• Industrial temperature range (-40°C to +85°C)
• Rugged construction resistant to high shock and vibration

Microcontrollers, Microprocessor, FPGA Modules Applications

• Industrial automation and control systems
• High-vibration embedded applications
• Data acquisition and processing modules
• Communication equipment requiring robust connectivity

Microcontrollers, Microprocessor, FPGA Modules Procurement Notes

Verify that the specific ordering suffix corresponds to the required temperature grade and FPGA speed grade. Confirm baseboard connector mating height compatibility, as standard modules use 8mm height connectors. Ensure the baseboard design supports the recommended single 3.3V supply or split 5V/3.3V configuration for optimal power efficiency.

Microcontrollers, Microprocessor, FPGA Modules Selection Notes

Select this module when an Artix-7 FPGA with moderate logic resources and high-speed serial transceivers is required in a compact form factor. The industrial temperature rating makes it suitable for harsh environments where commercial-grade components would fail. Consider the integrated USB 3.0 bridge if high-speed data transfer to a host PC is needed without additional external controllers.

Microcontrollers, Microprocessor, FPGA Modules Part Context

This module belongs to the Trenz Electronic TE0713 family, which uses a 4x5 cm form factor. It is mechanically compatible with other SoMs in this series. The '02' in the part number typically denotes the industrial temperature variant, while '82C46' specifies the XC7A100T FPGA with its specific speed grade and package.

Microcontrollers, Microprocessor, FPGA Modules Replacement Considerations

Direct pin-compatible replacements are not available from other manufacturers due to the proprietary integration of peripherals and connectors. For FPGA-only upgrades, consider higher-density Xilinx Artix-7 devices, but a custom carrier board will be required.