TE0715-05-71I33-L

Microcontrollers, Microprocessor, FPGA Modules Overview

The TE0715-05-71I33-L is an industrial-grade System-on-Module (SOM) manufactured by Trenz Electronic GmbH. It integrates the AMD Zynq-7000 series SoC, specifically the XC7Z020 variant, featuring dual ARM Cortex-A9 cores operating at a maximum frequency of 125MHz. The module includes 1GB of DDR3 SDRAM and 32MB of flash memory for storage. It utilizes Samtec LSHM connectors for interface connectivity. The physical dimensions are 50.00mm x 40.00mm, designed for compact embedded applications requiring mixed processing and programmable logic capabilities.

Microcontrollers, Microprocessor, FPGA Modules Feature Summary

• Integrates Xilinx Zynq-7000 SoC with dual ARM Cortex-A9 processors and programmable logic fabric
• Includes integrated 1GB DDR3 SDRAM and 32MB non-volatile flash memory
• Utilizes Samtec LSHM connector interfaces for reliable signal transmission
• Designed for industrial-grade operation within specified temperature ranges

Microcontrollers, Microprocessor, FPGA Modules Applications

• Industrial automation and control systems
• Embedded data acquisition and monitoring
• Portable medical devices
• Communication infrastructure modules

Microcontrollers, Microprocessor, FPGA Modules Procurement Notes

Verify component availability status prior to procurement as supply conditions may be restricted or subject to change. Confirm that the specific ordering suffix corresponds to the required connector type and performance grade. Ensure compatibility with existing carrier board designs regarding pinout and power requirements. Check for any recent Product Change Notifications (PCN) that might affect long-term supply or specifications.

Microcontrollers, Microprocessor, FPGA Modules Selection Notes

Select this module when a combined ARM processor and FPGA fabric is required in a small form factor. The 125MHz clock speed and 1GB RAM support moderate computational loads. Compare against variants like TE0715-05-71I33-A if different connector heights or commercial-grade temperatures are acceptable. Ensure the 50mm x 40mm footprint fits the target enclosure constraints.

Microcontrollers, Microprocessor, FPGA Modules Part Context

This part belongs to the Trenz Electronic TE0715 family of Zynq-based SOMs. It is distinct from higher-performance Zynq Ultrascale+ modules such as the TE0715-05-71I33-A. The 'L' suffix typically denotes specific connector configurations compared to other variants in the same series. It serves as a mid-range solution between smaller DIPFORTy modules and larger high-density boards.

Microcontrollers, Microprocessor, FPGA Modules Replacement Considerations

Direct replacements are limited due to specific connector and configuration differences. Consider the TE0715-05-71I33-A if the connector height difference is acceptable and industrial temperature rating is sufficient. Verify pinout compatibility before substituting with other Trenz Zynq-7000 modules.