TE0726-03-41I64-A

Overview

The Trenz Electronic TE0726-03-41I64-A is an industrial-grade System on Module (SoM) based on the Xilinx Zynq XC7Z010 SoC. It features a Raspberry Pi Model 2 form factor with dimensions of 40 mm x 30 mm. The module includes up to 512 MByte DDR3L SDRAM, 16 MByte SPI Flash memory, and a LAN9514 controller providing four USB 2.0 ports and 10/100 Mbit Ethernet. Connectivity options include HDMI, MIPI DSI for displays, CSI-2 for cameras, and a 26-pin GPIO header.

Feature Summary

• Xilinx Zynq XC7Z010-1CLG225C All Programmable SoC
• Up to 512 MByte DDR3L SDRAM and 16 MByte SPI Flash
• LAN9514 integrated USB hub and 10/100 Ethernet controller
• Raspberry Pi Model 2 compatible form factor

Applications

• Industrial automation controllers
• Embedded vision systems utilizing CSI-2 camera interfaces
• Portable devices requiring HDMI display output
• IoT gateways with Ethernet and USB connectivity

Procurement Notes

Verify that the specific ordering suffix corresponds to the required RAM capacity variant (e.g., 128 MByte or 512 MByte). Confirm the temperature range specification matches the application environment, as commercial grade variants are listed. Ensure the delivery state meets requirements regarding pre-programmed CPLD firmware and FTDI EEPROM licenses.

Selection Notes

Select this module if a compact FPGA SoM with native Raspberry Pi mechanical compatibility is required. Consider the TE0726-03M variant for maximum 512 MByte RAM availability. Evaluate the boot process constraints where the FSBL must load from SPI Flash before accessing SD Card storage. Verify I/O voltage levels for Bank 34 (3.3V) and Bank 35 (1.8V) against peripheral requirements.

Part Context

This module belongs to the TE0726 'ZynqBerry' family produced by Trenz Electronic GmbH. It utilizes the Lattice MachXO2 CPLD for system control and the FT2232H chip for USB-to-JTAG/UART debugging capabilities. The design supports both ARM processor and FPGA programmable logic integration within a single industrial-grade package.

Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Alternative modules would require manual verification of pin compatibility, SoC specifications, and mechanical footprint alignment with existing carrier boards.