TIL117SR2M

$0.20

Description：OPTOISO 7.5KV TRANS W/BASE 6-SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)

SKU:437a6c592ea7 Category: Transistor, Photovoltaic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

Product Detailed Parameters

Description：OPTOISO 7.5KV TRANS W/BASE 6-SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)
Number of Channels：1
Voltage - Isolation：7500Vpk
Current Transfer Ratio (Min)：50% @ 10mA
Current Transfer Ratio (Max)：-
Turn On / Turn Off Time (Typ)：10µs, 10µs (Max)
Rise / Fall Time (Typ)：2µs, 2µs
Input Type：DC
Output Type：Transistor with Base
Voltage - Output (Max)：30V
Current - Output / Channel：-
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：60 mA
Vce Saturation (Max)：400mV
Operating Temperature：-40°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：6-SMD, Gull Wing
Supplier Device Package：6-SMD

Download product information

TIL117SR2M

Overview

The onsemi TIL117SR2M is a single-channel optocoupler featuring an NPN phototransistor output with base connection. It utilizes a surface-mount SMD-DIP-6 package. Key electrical parameters include a maximum collector-emitter voltage of 30V, a forward current of 60mA, and a forward voltage of 1.5V. The device offers a minimum current transfer ratio of 50% and supports an isolation voltage of 4170 Vrms. Operating temperatures range from -40°C to +100°C, with power dissipation rated at 250mW.

Feature Summary

Integrates an NPN phototransistor with a dedicated base terminal for enhanced switching control and faster turn-off times compared to standard configurations.
Provides high-voltage isolation between input and output circuits to protect sensitive low-voltage logic from high-voltage noise or transients.
Designed for surface-mount assembly using a compact six-pin SMD-DIP form factor suitable for automated PCB placement.

Applications

Microcontroller interface circuits requiring galvanic isolation
Solid-state relay driver stages
Industrial communication bus isolators

Procurement Notes

Verify the specific suffix 'SR2VM' against official datasheets to confirm the exact reel packaging and tape specifications. Ensure the procurement channel provides valid RoHS compliance documentation. Cross-reference the manufacturer part number with the distributor's catalog to avoid confusion with similar H11L series devices that may share partial naming conventions but differ in output type.

Selection Notes

Select this component when a base-connected phototransistor is required for improved switching speed over standard transistor outputs. Compare the 30V collector-emitter voltage rating against load requirements. Evaluate the 50% minimum CTR to ensure sufficient drive capability for downstream logic gates. Confirm the SMD-DIP-6 footprint matches the target PCB design constraints.

Part Context

This device belongs to the TIL117M series of transistor-output optoisolators. It shares functional similarities with other single-channel isolators but distinguishes itself through the inclusion of a base pin on the phototransistor. This configuration allows for external biasing or faster discharge of junction capacitance, differentiating it from basic phototransistor-only optocouplers in the same product family.