TL064ACDT

Instrumentation, Op Amps, Buffer Amps Overview

The TL064ACDT is a quad low-power JFET input operational amplifier manufactured by STMicroelectronics. It features four independent amplifiers in a single SOIC-14 package. Key electrical parameters include a gain-bandwidth product of 1 MHz and a slew rate of 3.5 V/us. The input bias current is 200 pA, with an input offset voltage of 6 mV. It operates on a supply voltage range from 3 V to 18 V (single) or 6 V to 36 V (dual). The quiescent current per amplifier is 1 mA. Common-mode rejection ratio is 80 dB, and power supply rejection ratio is 80 dB. Input voltage noise density is 42 nV/sqrt Hz. Operating temperature ranges from 0 C to +70 C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• JFET input stage providing high input impedance
• Low power consumption design
• Internal frequency compensation for stability
• Output short-circuit protection

Instrumentation, Op Amps, Buffer Amps Applications

• General-purpose analog signal processing
• Audio pre-amplification stages
• Sensor signal conditioning
• Active filter circuits

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix 'ACDT' corresponds to the required temperature grade and tape-and-reel packaging format. Confirm RoHS compliance status through official documentation before integration. Ensure the SOIC-14 footprint matches the PCB layout specifications. Check for any specific handling requirements related to JFET inputs.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when low input bias current and moderate bandwidth are required. The quad configuration reduces board space compared to single op-amps. Consider the 0 C to +70 C operating range for industrial applications. Verify that the 1 MHz gain-bandwidth product meets the signal frequency requirements.

Instrumentation, Op Amps, Buffer Amps Part Context

The TL064ACDT belongs to the TL06x family of JFET input operational amplifiers. This series is designed for applications requiring high input impedance and low power consumption. The 'A' variant typically denotes specific offset voltage and drift characteristics within the family. The 'CDT' suffix indicates the SOIC-14 package and reel/cut-tape shipping method.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Check for direct pin-compatible replacements within the TL06x family, such as TL064C or TL064I, depending on temperature and accuracy needs. Verify if alternative manufacturers offer equivalent quad JFET op-amps with similar electrical specifications and package dimensions.