TL072HIPWR

Instrumentation, Op Amps, Buffer Amps Overview

The TL072HIPWR is a dual low-noise JFET-input operational amplifier manufactured by Texas Instruments. It features a gain-bandwidth product of 5.25 MHz and a slew rate of 20 V/us. The input offset voltage is specified at 4 mV, with an input bias current of 1 pA. Operating from a supply voltage range of 4.5 V to 40 V, it draws 1.143 mA of quiescent current per channel. The device offers a common-mode rejection ratio of 100 dB and an input voltage noise density of 21 nV/sqrt Hz. It is housed in an 8-pin HTSSOP package and supports an operating temperature range from -40 C to +125 C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• High-speed performance with a 20 V/us slew rate and 5.25 MHz gain-bandwidth product
• Ultra-low input bias current of 1 pA for minimal circuit loading
• Extended industrial temperature operation up to +125 C
• Low-noise JFET input stage suitable for precision signal conditioning

Instrumentation, Op Amps, Buffer Amps Applications

• Precision audio processing circuits
• Active filter designs requiring high slew rates
• Instrumentation amplifiers
• Photodiode transimpedance amplifiers

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix 'H' indicates the extended temperature grade and high-speed variant compared to standard TL072 models. Confirm the 'PWR' suffix corresponds to the HTSSOP-8 package type. Ensure the component meets the required -40 C to +125 C operating range specifications for your application environment before finalizing procurement.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when high slew rate and wide bandwidth are critical alongside low input bias current. The extended temperature range makes it suitable for harsh environments where standard commercial grade parts may fail. Compare against TL072 variants if lower cost or different packaging is acceptable, noting that the H-series offers superior speed and thermal tolerance.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the Texas Instruments TL072 family of low-noise JFET-input operational amplifiers. The TL072 series is widely recognized for its combination of low noise, high input impedance, and fast slew rates. The TL072HIPWR specifically represents the high-performance, extended temperature version of this popular dual op-amp architecture.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

TL072IDR

Instrumentation, Op Amps, Buffer Amps FAQ

What is the maximum supply voltage for the TL072HIPWR?

The maximum supply voltage is 40 V.

Does the TL072HIPWR support rail-to-rail output?

No, the TL072HIPWR does not feature rail-to-rail output capabilities.