TLC072IDGNRG4

$0.90

Description：IC OPAMP GP 2 CIRCUIT 8HVSSOP
Series：-
Mfr：Texas Instruments
Package：Tape & Reel (TR)

SKU:54baa3039340 Category: Instrumentation, Op Amps, Buffer Amps Brand: Texas Instruments

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

TLC072IDGNRG4 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Texas Instruments. Its product description is IC OPAMP GP 2 CIRCUIT 8HVSSOP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for TLC072IDGNRG4

Description：IC OPAMP GP 2 CIRCUIT 8HVSSOP
Series：-
Mfr：Texas Instruments
Package：Tape & Reel (TR)
Amplifier Type：General Purpose
Number of Circuits：2
Output Type：-
Slew Rate：19V/µs
Gain Bandwidth Product：10 MHz
Current - Input Bias：1.5 pA
Voltage - Input Offset：390 µV
Current - Supply：2.1mA (x2 Channels)
Current - Output / Channel：57 mA
Voltage - Supply Span (Min)：4.5 V
Voltage - Supply Span (Max)：16 V
Operating Temperature：-40°C ~ 125°C (TA)
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package：8-HVSSOP
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for TLC072IDGNRG4

TLC072IDGNRG4

Instrumentation, Op Amps, Buffer Amps Overview

The TLC072IDGNRG4 is a dual-channel operational amplifier from the BiMOS TLC07xA family, designed for single-supply systems. It features a gain-bandwidth product of 10 MHz and high slew rates of 16 V/µs (positive) and 19 V/µs (negative). The device provides high output drive capability with sourcing currents up to 57 mA and sinking currents up to 55 mA. Operating on a supply voltage range of 4.5 V to 16 V, it draws 1.9 mA per channel. Key electrical characteristics include an input offset voltage of 390 µV typical at 25°C, low input bias current of 1.5 pA, and input noise voltage density of 7 nV/√Hz.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Combines a low-noise CMOS front end with a high-drive bipolar output stage for optimized AC and DC performance.
Includes an ultralow power shutdown mode that reduces supply current to approximately 125 µA per channel.
Offers offset nulling pins to minimize input offset voltage errors in precision applications.

Instrumentation, Op Amps, Buffer Amps Applications

Audio signal processing circuits
Industrial instrumentation amplifiers
Automotive sensor interfaces

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix 'R' indicates tape and reel packaging when ordering. Confirm the 'I' suffix corresponds to the extended industrial temperature range of -40°C to 125°C. Ensure the 'G4' designation aligns with RoHS compliance requirements for your manufacturing process. Cross-reference the MSOP-8 package dimensions with your PCB footprint library.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when transitioning from dual-supply BiFET designs to single-supply systems requiring higher bandwidth. It serves as a direct upgrade path offering improved slew rate and lower noise compared to legacy TL07x series devices. Consider the shutdown feature if power conservation during idle states is critical for the system design.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the TLC07xA family of wide-bandwidth, high-output-drive operational amplifiers developed using TI's LBC3 BiCMOS process. The family includes single, dual, and quad variants such as the TLC070, TLC071, TLC073, TLC074, and TLC075. The TLC072 specifically integrates two independent channels within an 8-pin MSOP PowerPAD package.