TLC082AIP

Instrumentation, Op Amps, Buffer Amps Overview

The TLC082AIP is a dual wide-bandwidth high-output-drive operational amplifier from Texas Instruments, housed in an 8-pin Plastic DIP package. It operates on a single supply voltage ranging from 4.5 V to 16 V or split supplies of ±2.25 V to ±8 V. The device features a gain-bandwidth product of 10 MHz, a positive slew rate of 16 V/µs, and a negative slew rate of 19 V/µs. It provides high output drive capability with sourcing current up to 57 mA and sinking current up to 55 mA. The input offset voltage is typically 390 µV at 25°C, with a maximum of 1.4 mV for the A-grade variant. Supply current per channel is approximately 1.9 mA to 2.9 mA depending on conditions.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Combines ultralow noise CMOS front end with high-drive bipolar output stage
• Supports single-supply operation including ground-referenced common-mode inputs
• Provides high output drive capability for demanding load applications
• Features low input offset voltage and temperature coefficient

Instrumentation, Op Amps, Buffer Amps Applications

• Audio processing circuits
• Automotive instrumentation systems
• General-purpose industrial signal conditioning

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix 'A' indicates the extended performance grade with lower input offset voltage compared to standard grades. Confirm the 'P' suffix corresponds to the 8-pin PDIP package type. Ensure the operating environment falls within the specified -40°C to 125°C range for the I-suffix variant if applicable, though the datasheet lists general availability for this package style.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when upgrading from BiFET amplifiers requiring higher AC and DC performance in single-supply systems. It offers significant improvements in bandwidth and noise over TL08x predecessors. Consider the high output drive for driving low-impedance loads directly without additional buffering stages.

Instrumentation, Op Amps, Buffer Amps Part Context

Part of the TLC08xA family developed using TI's LBC3 BiCMOS process. This family includes single (TLC080/1), dual (TLC082), triple (TLC083), and quad (TLC084/5) configurations. The TLC082AIP specifically provides two independent amplifiers in a through-hole package suitable for prototyping and general circuit board designs.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

TL082 variants offer similar functionality but with lower bandwidth and higher noise. TLC082CDR or TLC082ID are surface-mount equivalents within the same family.