TLC27M4IPW

Instrumentation, Op Amps, Buffer Amps Overview

The TLC27M4IPW is a precision quad operational amplifier manufactured by Texas Instruments, utilizing LinCMOS technology. It features rail-to-rail input and output capabilities, allowing operation with single or dual power supplies ranging from 3 V to 16 V. The device offers a gain-bandwidth product of 525 kHz and a slew rate of 620 mV/µs. Key electrical specifications include an input offset voltage of 1.1 mV, input bias current of 700 fA, and a common-mode rejection ratio of 91 dB. It operates within a temperature range of -40°C to +85°C and is housed in an 8-pin TSSOP package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• LinCMOS precision architecture for low power consumption
• Rail-to-rail input and output performance
• High common-mode rejection ratio
• Low input bias current

Instrumentation, Op Amps, Buffer Amps Applications

• Battery-powered instrumentation systems
• Precision signal conditioning circuits
• Active filter designs
• Data acquisition front-ends

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix 'IPW' corresponds to the TSSOP-8 package and industrial temperature grade (-40°C to +85°C) as defined in the official Texas Instruments datasheet. Confirm RoHS compliance status and ensure the ordering part number matches the exact pinout and thermal characteristics required for the target PCB layout. Cross-reference with the manufacturer's latest revision history for any design changes.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when rail-to-rail I/O is required alongside precision DC accuracy in a compact surface-mount package. Compare against the TLC27L4 series if lower quiescent current is prioritized over speed, or against the TLC27M2 if only two channels are needed. Ensure the 525 kHz bandwidth meets the application's frequency response requirements.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the TLC27M4 family of LinCMOS precision quad operational amplifiers. It shares architectural similarities with the TLC27L4 but offers higher speed at the cost of increased supply current. The IPW suffix denotes the plastic small-outline package variant suitable for automated surface-mount assembly processes.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

TLC27M4IDR (SOIC-14 package)

Instrumentation, Op Amps, Buffer Amps FAQ

What is the maximum supply voltage for the TLC27M4IPW?

The maximum supply voltage is 16 V.

Does the TLC27M4IPW support rail-to-rail output?

Yes, the device features rail-to-rail input and output capabilities.