TLP2710(TP4,E

Logic Output Optoisolators Overview

The TLP2710(TP4,E is a high-speed logic output optoisolator manufactured by Toshiba Semiconductor and Storage. It features a push-pull or totem pole output configuration with a data rate of 5MBd. The device provides 5000Vrms isolation voltage and supports a supply voltage range of 2.7V to 5.5V. Key electrical parameters include a maximum propagation delay of 250ns for both low-to-high and high-to-low transitions, with typical rise and fall times of 11ns and 13ns respectively. It offers a minimum common-mode transient immunity (CMTI) of 25kV/µs and can deliver an output current of 10mA per channel.

Logic Output Optoisolators Feature Summary

• High-speed operation with a 5MBd data rate capability
• Push-pull output stage providing strong drive capability
• High common-mode transient immunity for noise rejection
• Wide operating temperature range suitable for industrial environments

Logic Output Optoisolators Applications

• Industrial automation control systems
• Communication interface isolation
• Power supply feedback loops
• Microcontroller input/output isolation

Logic Output Optoisolators Procurement Notes

Verify the specific suffix TP4 against the manufacturer's official datasheet to confirm pinout and packaging dimensions. Ensure the component meets RoHS3 compliance requirements if mandated by your project specifications. Cross-reference the ordering code with authorized distributors to avoid counterfeit parts. Confirm that the 6-SO package width matches your PCB footprint design constraints before finalizing procurement.

Logic Output Optoisolators Selection Notes

Select this component when high-speed digital isolation is required between circuits with different ground potentials. The push-pull output eliminates the need for external pull-up resistors, simplifying circuit design. Consider the 5000Vrms isolation rating for safety-critical applications. Verify that the 2.7V to 5.5V supply range aligns with your system's logic levels. Evaluate the 25kV/µs CMTI specification against the noise environment of your application.

Logic Output Optoisolators Part Context

This part belongs to the TLP2710 series of high-speed optocouplers from Toshiba. It is designed for applications requiring fast signal transmission across isolation barriers. The series typically includes variants with different packaging or lead-free options. It serves as a replacement for older logic output optocouplers in modern high-speed digital interfaces.

Logic Output Optoisolators Replacement Considerations

Check for direct substitutes such as TLP2710(D4-TP4,E which shares similar electrical characteristics. Verify pin compatibility and isolation voltage ratings before substitution. Ensure the alternative component meets the same 5MBd speed requirement and push-pull output configuration.