TLP2761F(D4,F)

Logic Output Optoisolators Overview

The TLP2761F(D4,F) is a logic output optoisolator featuring a push-pull, totem pole output stage. It supports a data rate of 15MBd and provides isolation voltage of 5000Vrms. The device exhibits a common-mode transient immunity (CMTI) of 20kV/µs. Maximum propagation delay parameters are specified for tpLH and tpHL. The typical forward voltage is 1.5V, with a typical rise/fall time of 3ns. It is housed in a 6-SO package.

Logic Output Optoisolators Feature Summary

• Push-pull totem pole output configuration for robust logic signal transmission
• High-speed operation capability supporting 15MBd data rates
• Enhanced noise immunity with 20kV/µs common-mode transient rejection

Logic Output Optoisolators Applications

• Digital communication interfaces requiring galvanic isolation
• Microprocessor system input/output isolation
• Signal transmission between isolated ground domains

Logic Output Optoisolators Procurement Notes

Verify the specific suffix D4 against the manufacturer's current datasheet to confirm pinout and electrical characteristics match your design requirements. Ensure the 6-SO package dimensions align with your PCB footprint. Confirm RoHS compliance status if required by your manufacturing standards. Cross-reference the part number with official Toshiba Semiconductor documentation to avoid counterfeit components.

Logic Output Optoisolators Selection Notes

Select this component when high-speed digital isolation is necessary alongside strong noise immunity. The push-pull output eliminates the need for external pull-up resistors, simplifying circuit design. Consider the 5000Vrms isolation rating for safety-critical applications. Evaluate the 15MBd speed limit against your system's maximum clock frequency to ensure reliable signal integrity without distortion.

Logic Output Optoisolators Part Context

This device belongs to the TLP2761 series of logic output optocouplers from Toshiba Semiconductor and Storage. It is designed for applications demanding fast switching speeds and high reliability in noisy environments. The series typically integrates an AlGaAs LED with a monolithic silicon photodetector and output driver circuitry on a single chip.

Logic Output Optoisolators Replacement Considerations

Consult official Toshiba substitution guides for verified equivalents. Generic replacements may differ in CMTI or propagation delay specifications. Verify that any substitute maintains the same 6-SO package and pin configuration to ensure mechanical compatibility.