TLP3042SCF

Description：OPTOISOLATOR 5KV TRIAC 1CH 6DIP
Series：-
Mfr：Toshiba Semiconductor and Storage
Package：Tube

SKU:c7611430beaa Category: Triac, SCR Output Optoisolators Brand: Toshiba Semiconductor and Storage

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

TLP3042SCF is listed in the Triac, SCR Output Optoisolators range at ChipApex. The manufacturer field lists Toshiba Semiconductor and Storage. Its product description is OPTOISOLATOR 5KV TRIAC 1CH 6DIP. Review the specifications below when checking this part for your BOM.

Triac, SCR Output Optoisolators specifications for TLP3042SCF

Description：OPTOISOLATOR 5KV TRIAC 1CH 6DIP
Series：-
Mfr：Toshiba Semiconductor and Storage
Package：Tube
Output Type：Triac
Zero Crossing Circuit：Yes
Number of Channels：1
Voltage - Isolation：5000Vrms
Voltage - Off State：400 V
Static dV/dt (Min)：200V/µs
Current - LED Trigger (Ift) (Max)：10mA
Current - On State (It (RMS)) (Max)：100 mA
Current - Hold (Ih)：600µA (Typ)
Turn On Time：-
Voltage - Forward (Vf) (Typ)：1.15V
Current - DC Forward (If) (Max)：50 mA
Operating Temperature：-40°C ~ 100°C
Mounting Type：Through Hole
Package / Case：6-DIP (0.300", 7.62mm), 5 Leads
Supplier Device Package：6-DIP (Cut), 5 Lead
Approval Agency：BSI, SEMKO, UR

Triac, SCR Output Optoisolators datasheet and documents for TLP3042SCF

TLP3042SCF

Triac, SCR Output Optoisolators Overview

The TLP3042SCF is a triac-output optoisolator featuring a zero-crossing detection circuit. It provides electrical isolation between the LED input and the triac output, rated at 5000Vrms. The device operates within a temperature range of -40°C to 100°C and utilizes a 6-DIP (0.300", 7.62mm), 5-lead package. Key electrical specifications include a maximum DC forward current of 50 mA, a typical holding current of 600µA, and an off-state voltage of 400 V. The static dV/dt rating is minimum 200V/µs.

Triac, SCR Output Optoisolators Feature Summary

Integrated zero-crossing detection circuit for reduced electromagnetic interference during switching
High isolation voltage rating of 5000Vrms for safe separation of control and power circuits
Triac output configuration suitable for direct AC load control applications

Triac, SCR Output Optoisolators Applications

Solid-state relay modules
AC motor speed controllers
Lighting dimmer circuits

Triac, SCR Output Optoisolators Procurement Notes

Verify component authenticity through authorized distributors. Confirm RoHS compliance status and check for obsolescence notices from Toshiba Semiconductor and Storage. Ensure packaging matches the specified 6-DIP form factor for correct PCB integration.

Triac, SCR Output Optoisolators Selection Notes

Select this component when zero-crossing functionality is required to minimize noise in AC switching applications. Compare against similar models like MOC3043M or VO4154H if alternative sourcing is needed. Verify that the 400V off-state voltage meets the peak line voltage requirements of the target application.

Triac, SCR Output Optoisolators Part Context

This part belongs to the TLP304x series of optoisolators designed for AC power control. It shares functional similarities with other zero-crossing triac drivers but offers specific pinout and isolation characteristics defined by Toshiba Semiconductor and Storage standards for industrial and consumer electronics.