TLP360J(CANO)

Triac, SCR Output Optoisolators Overview

The TLP360J(CANO) is a single-channel optocoupler featuring a gallium arsenide infrared-emitting diode optically coupled to a photo-triac output. It provides high isolation voltage of 5000 Vrms minimum and supports a peak off-state voltage of 600 V minimum. The device operates with a maximum trigger LED current of 10 mA and handles a maximum on-state current of 100 mA. It functions without zero-crossing detection, allowing for phase control applications. The component is housed in a four-lead plastic DIP package.

Triac, SCR Output Optoisolators Feature Summary

• Integrates a GaAs infrared LED with a photo-triac for electrical isolation
• Provides high dielectric strength with 5000 Vrms isolation voltage
• Supports non-zero-crossing turn-on for flexible AC power control

Triac, SCR Output Optoisolators Applications

• Triac drivers for AC power switching
• Programmable controllers requiring isolated outputs
• Solid state relays (SSR) for industrial loads
• AC-output modules in automation systems

Triac, SCR Output Optoisolators Procurement Notes

Verify the specific ordering suffix CANO against official Toshiba Semiconductor and Storage documentation to confirm package type and tape-and-reel specifications. Ensure compliance with UL 1577 recognition requirements for your application safety standards. Cross-reference the part number with the manufacturer's current lifecycle status to confirm availability and obsolescence warnings before finalizing procurement plans.

Triac, SCR Output Optoisolators Selection Notes

Select this component when phase-angle control is required rather than zero-crossing switching. The absence of zero-crossing circuitry allows for precise timing control in dimming or speed regulation applications. Ensure the load current does not exceed the 100 mA on-state limit and that the system insulation requirements are met by the 5000 Vrms rating. Verify thermal management for continuous operation within the specified temperature range.

Triac, SCR Output Optoisolators Part Context

This device belongs to the TLP360 series of photocouplers from Toshiba Semiconductor and Storage. It shares architectural similarities with the TLP361J but differs in switching behavior; while the TLP361J includes zero-crossing detection, the TLP360J lacks this feature to enable phase control. Both utilize a photo-triac output and offer comparable isolation voltages, serving distinct roles in AC power management circuits.

Triac, SCR Output Optoisolators Replacement Considerations

Direct substitutes must maintain the 4-DIP package and triac output configuration. Verify that any replacement component matches the 600 V peak off-state voltage and 5000 Vrms isolation requirements. Check if the alternative part supports non-zero-crossing operation if phase control is essential. Confirm pinout compatibility and thermal characteristics to ensure seamless integration into existing PCB layouts.