Transistor, Photovoltaic Output Optoisolators TLP781F(D4-GRL,F) product image

TLP781F(D4-GRL,F)

  • Description:OPTOISOLATOR 5KV 1CH TRANS 4-DIP
  • Series:-
  • Mfr:Toshiba Semiconductor and Storage
  • Package:Tube

SKU:328d7f9f87b7 Category: Brand:

ChipApex WhatsApp

Consult the customer manager about the wholesale price.

consultation hotline:86-132-6715-2157

email:[email protected]
Contact the product manager for consultation. One-stop consultation is available.


Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Submitting!
Submission successful!
Submission failed!
Email error!
Phone number error!

TLP781F(D4-GRL,F) is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Toshiba Semiconductor and Storage. Its product description is OPTOISOLATOR 5KV 1CH TRANS 4-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for TLP781F(D4-GRL,F)

  • Description:OPTOISOLATOR 5KV 1CH TRANS 4-DIP
  • Series:-
  • Mfr:Toshiba Semiconductor and Storage
  • Package:Tube
  • Number of Channels:1
  • Voltage - Isolation:5000Vrms
  • Current Transfer Ratio (Min):100% @ 5mA
  • Current Transfer Ratio (Max):200% @ 5mA
  • Turn On / Turn Off Time (Typ):3µs, 3µs
  • Rise / Fall Time (Typ):2µs, 3µs
  • Input Type:DC
  • Output Type:Transistor
  • Voltage - Output (Max):80V
  • Current - Output / Channel:50mA
  • Voltage - Forward (Vf) (Typ):1.15V
  • Current - DC Forward (If) (Max):60 mA
  • Vce Saturation (Max):400mV
  • Operating Temperature:-55°C ~ 110°C
  • Mounting Type:Through Hole
  • Package / Case:4-DIP (0.400", 10.16mm)
  • Supplier Device Package:4-DIP

Transistor, Photovoltaic Output Optoisolators datasheet and documents for TLP781F(D4-GRL,F)

TLP781F(D4-GRL,F)

Transistor, Photovoltaic Output Optoisolators Overview

The Toshiba TLP781F(D4-GRL,F) is a single-channel transistor output optocoupler housed in a 4-lead plastic DIP package with a 10.16mm pitch. It integrates a gallium arsenide infrared emitting diode and a silicon phototransistor. Key electrical parameters include a collector-emitter breakdown voltage of 80V minimum, an isolation voltage of 5000Vrms minimum, and a typical forward voltage of 1.3V. The device features a current transfer ratio of 100% minimum for the GB rank, with rise and fall times of 2μs and 3μs respectively. Operating temperature ranges from -55°C to 110°C.

Transistor, Photovoltaic Output Optoisolators Feature Summary

  • High isolation voltage capability of 5000Vrms minimum between input and output circuits.
  • Wide operating temperature range supporting environments from -55°C to 110°C.
  • Fast switching performance with typical rise time of 2μs and fall time of 3μs.
  • Long creepage surface mounting design enabled by the extended lead DIP4 package.

Transistor, Photovoltaic Output Optoisolators Applications

  • Office equipment signal transmission
  • Household appliance control circuits
  • Solid state relay driver interfaces
  • Switching power supply feedback loops

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix codes against official Toshiba Semiconductor and Storage documentation to confirm pin pitch and ranking specifications. Ensure the ordering part number matches the required current transfer ratio grade and package variant. Cross-reference datasheet revisions to confirm compliance standards and environmental certifications prior to procurement.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when high isolation voltage and wide temperature tolerance are required for DC signal transmission. The 10.16mm pitch DIP4 package facilitates long creepage distance mounting compared to standard 7.62mm variants. Verify that the NPN phototransistor output configuration aligns with the load requirements and that the 80V collector-emitter voltage rating exceeds the circuit's maximum operating voltage.

Transistor, Photovoltaic Output Optoisolators Part Context

This device belongs to the TLP781/TLP785 series of photocouplers manufactured by Toshiba Semiconductor and Storage. The series utilizes a GaAs IRED coupled to a silicon phototransistor. The 'F' designation typically indicates the lead-formed version designed for surface mounting applications requiring extended creepage distances, distinguishing it from the standard through-hole DIP4 variant.

Transistor, Photovoltaic Output Optoisolators Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided source material. Consult official Toshiba documentation or authorized distributors for verified equivalent components meeting identical electrical and mechanical specifications.

TLP781F(D4-GRL,F)TLP781F(D4-GRL,F)

Click on the inquiry