TP1562AL1-FR

Instrumentation, Op Amps, Buffer Amps Overview

The TP1562AL1-FR is a dual-channel CMOS operational amplifier featuring rail-to-rail input and output capabilities. It operates on a supply voltage range of 2.5 V to 6 V with a typical quiescent current of 600 μA per channel. Key electrical parameters include a gain-bandwidth product of 6 MHz, a slew rate of 4.5 V/μs, and an input offset voltage of ±3 mV maximum. The device delivers a typical output short-circuit current of 100 mA and exhibits low noise density of 19 nV/√Hz at 1 kHz. It functions within an operating temperature range of −40°C to +125°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Rail-to-rail input and output stages enable full signal swing in single-supply systems.
• Low power consumption design draws only 600 μA per channel for battery efficiency.
• High EMI suppression performance ensures stable operation in noisy environments.
• Capable of driving heavy capacitive loads while maintaining stability.

Instrumentation, Op Amps, Buffer Amps Applications

• Automotive motor control
• On-board charger systems
• Buffering CMOS DACs and ASICs

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific package variant against the datasheet order information, as the FR suffix indicates tape and reel packaging. Confirm that the selected pinout (SOP8 or MSOP8) matches the intended PCB footprint. Ensure the application environment stays within the specified -40°C to +125°C temperature range. Validate that the supply voltage does not exceed the absolute maximum ratings to prevent damage.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when high bandwidth and low power are required simultaneously. The rail-to-rail capability makes it suitable for low-voltage single-supply designs. Consider the 100 mA output drive for applications requiring significant load current. Verify compatibility with existing circuit topologies due to its unity-gain stability with capacitive loads.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the TP156xAL1 series of RRIO operational amplifiers from 3PEAK. The series includes single, dual, and quad variants sharing similar electrical characteristics. The TP1562AL1 specifically provides two independent amplifiers in one package. It is designed as a drop-in replacement for many commercially available op-amps to improve performance and reduce power.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Check pinout compatibility with legacy components before substitution. Verify that the new part's supply voltage range and current requirements fit the existing system constraints. Ensure thermal management is adequate for the chosen package type under maximum load conditions.