TPS75225QPWPRQ1

$2.43

Description：IC REG LINEAR 2.5V 2A 20-HTSSOP
Series：-
Mfr：Texas Instruments
Package：Tape & Reel (TR)

SKU:ce888efeb25a Category: Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Brand: Texas Instruments

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

TPS75225QPWPRQ1 is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists Texas Instruments. Its product description is IC REG LINEAR 2.5V 2A 20-HTSSOP. Review the specifications below when checking this part for your BOM.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators specifications for TPS75225QPWPRQ1

Description：IC REG LINEAR 2.5V 2A 20-HTSSOP
Series：-
Mfr：Texas Instruments
Package：Tape & Reel (TR)
Output Configuration：Positive
Output Type：Fixed
Number of Regulators：1
Voltage - Input (Max)：5.5V
Voltage - Output (Min/Fixed)：2.5V
Voltage - Output (Max)：-
Voltage Dropout (Max)：-
Current - Output：2A
Current - Quiescent (Iq)：125 µA
Current - Supply (Max)：-
PSRR：60dB (100Hz)
Control Features：Enable, Power Good, Reset Output
Protection Features：Over Current, Over Temperature, Reverse Polarity
Operating Temperature：-40°C ~ 125°C
Mounting Type：Surface Mount
Package / Case：20-PowerTSSOP (0.173", 4.40mm Width)
Supplier Device Package：20-HTSSOP
Grade：Automotive
Qualification：AEC-Q100

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators datasheet and documents for TPS75225QPWPRQ1

TPS75225QPWPRQ1

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Overview

The TPS75225QPWPRQ1 is a fixed-output automotive-grade low-dropout (LDO) voltage regulator from the TPS752 series. It provides a fixed 2.5V output with a maximum load current of 2A. The device features a typical dropout voltage of 210mV at full load and operates within an input voltage range of 2.7V to 5.5V. Key electrical specifications include a quiescent current of 70µA, power supply rejection ratio (PSRR) of 16dB at 100kHz, and output noise of 60µVRMS. It is housed in a 20-HTSSOP package and supports an operating temperature range of -40°C to +125°C.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Feature Summary

Fast transient response capability for dynamic load conditions
Automotive qualification compliant with AEC-Q100 standards
Integrated enable control and power good status monitoring

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Applications

Power distribution networks in automotive electronic control units
Voltage regulation for microcontrollers and digital logic in vehicles
Biasing stages for sensors and actuators in automotive systems

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Procurement Notes

Verify component authenticity through authorized channels due to its end-of-life status. Confirm package integrity and pin alignment upon receipt. Ensure storage conditions meet moisture sensitivity level requirements before reflow soldering. Cross-reference datasheet revisions to confirm parameter consistency with design specifications.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Selection Notes

Select this component when a stable 2.5V rail is required for automotive applications demanding fast transient recovery. Evaluate thermal performance based on the 57.9°C/W junction-to-ambient resistance. Consider the 2A current limit and 210mV dropout voltage against system headroom requirements. Verify compatibility with non-ceramic output capacitors as specified.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Part Context

This part belongs to the TPS752 family of fast transient-response LDOs designed for automotive environments. It shares architectural similarities with other members like the TPS753xx and TPS75201, offering enhanced dynamic performance over standard regulators. The QPWR suffix indicates an automotive grade variant in a tape-and-reel packaging format suitable for automated assembly.