TS68S36DN4F

Overview

The TS68S36DN4F is a general-purpose speaker manufactured by Seltech, designed for telecom applications. It features a 63mm diameter and top round port configuration. The unit operates with a nominal impedance of 4 Ohms and handles a rated power of 10 W. Its frequency response spans from 100 Hz to 20 kHz, with a resonant frequency (F0) of 100 Hz. Physical dimensions are approximately 68.3 x 68.3 x 41.4 mm.

Feature Summary

• Designed specifically for telecom equipment integration
• Features a top round port acoustic design
• Constructed as a general-purpose audio transducer

Applications

• Telecom equipment audio output
• Industrial control system signaling
• Communication device speakers

Procurement Notes

Verify the specific datasheet version provided by Seltech or authorized distributors to confirm mechanical tolerances and acoustic performance curves. Ensure the 4 Ohm impedance matches the amplifier output stage requirements. Confirm RoHS compliance status if required for your manufacturing process. Check physical mounting hole patterns against the enclosure design before finalizing procurement.

Selection Notes

Select this component when a 63mm diameter speaker is required for telecom or industrial voice applications. The 4 Ohm impedance suits low-voltage amplifier stages. Consider the 10W power rating for adequate volume in standard environments. Verify that the 100Hz lower frequency limit meets the speech intelligibility requirements of the target application.

Part Context

Seltech specializes in acoustic and sensor components for electronic systems. This model belongs to their general-purpose speaker line, optimized for reliability in communication hardware. The TS68 series typically offers standardized form factors for easy integration into existing telecom chassis designs without requiring custom acoustic chambers.

Replacement Considerations

No publicly confirmed substitute part numbers are available in the source documentation. When replacing, ensure the new component matches the 4 Ohm impedance, 63mm diameter, and 10W power handling capabilities. Mechanical mounting dimensions must be verified to fit the existing enclosure.