TSH341ID

$3.80

Description：IC AMP GENERAL PURPOSE 8SO
Series：-
Mfr：STMicroelectronics
Package：Tube

SKU:b8f60e7c6729 Category: Video Amps and Modules Brand: STMicroelectronics

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

TSH341ID is listed in the Video Amps And Modules range at ChipApex. The manufacturer field lists STMicroelectronics. Its product description is IC AMP GENERAL PURPOSE 8SO. Review the specifications below when checking this part for your BOM.

Video Amps And Modules specifications for TSH341ID

Description：IC AMP GENERAL PURPOSE 8SO
Series：-
Mfr：STMicroelectronics
Package：Tube
Applications：General Purpose
Output Type：-
Number of Circuits：1
Slew Rate：400V/µs
Current - Supply：9.8 mA
Current - Output / Channel：100 mA
Voltage - Supply, Single/Dual (±)：3V ~ 5.5V
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOIC
-3db Bandwidth：300 MHz
Grade：-
Qualification：-

Video Amps And Modules datasheet and documents for TSH341ID

TSH341ID

Video Amps And Modules Overview

The TSH341ID is a single-supply video amplifier manufactured by STMicroelectronics, housed in an SO-8 package. It features a unity-gain bandwidth of 300 MHz and a slew rate of 400 V/µs. The device operates on a supply voltage ranging from 3V to 5.5V with a typical quiescent current of 9.8 mA. It provides low input and output rail capabilities, tested at a maximum of 60mV from ground under a 150Ω load. The amplifier supports a 100mA output short-circuit current and includes internal protection against transient currents.

Video Amps And Modules Feature Summary

High-speed performance with 300MHz bandwidth and 400V/µs slew rate for video signal processing
Low input and output rail operation close to ground potential for single-supply applications
Single supply operation capability down to 3V with low quiescent current consumption

Video Amps And Modules Applications

High-end video systems
High Definition TV (HDTV)
Broadcast video
Multimedia products

Video Amps And Modules Procurement Notes

Verify the specific suffix 'ID' corresponds to the SO-8 tube packaging configuration as defined in the manufacturer's ordering codes. Confirm that the component meets the required temperature range specifications for the intended operating environment. Ensure compatibility with existing board layouts designed for the SO-8 footprint. Check for any end-of-life or obsolescence notices associated with this specific part number variant before finalizing procurement plans.

Video Amps And Modules Selection Notes

Select the TSH341ID when high bandwidth and fast slew rates are required for driving video signals over transmission lines. Consider its low power consumption relative to its speed for battery-operated or thermally constrained designs. Evaluate the single-supply operation benefits if negative voltage rails are unavailable. Compare the low output rail specification against other amplifiers to ensure sufficient swing for the specific video standard being implemented.

Video Amps And Modules Part Context

The TSH341 series consists of single-supply operational amplifiers optimized for video applications. The TSH341ID specifically denotes the version packaged in an SO-8 plastic housing. This family is characterized by large bandwidth and low harmonic distortion, making it suitable for demanding analog signal processing tasks where signal integrity and speed are critical parameters.