UBA2036TS/N1,118

Overview

The UBA2036TS/N1,118 is a full-bridge controller IC designed for High Intensity Discharge (HID) lamp drivers in automotive and general lighting applications. It operates at a switching frequency of 100kHz and requires a supply voltage between 10.5 V and 13.5 V. The device supports surface mount mounting and functions within an operating temperature range of -40°C to 125°C. It does not include integrated dimming capabilities. The component is housed in a 28-SSOP package.

Feature Summary

• Full-bridge controller architecture optimized for HID lamp driving
• Integrated operation at 100kHz switching frequency
• Designed for automotive headlight and projector applications

Applications

• Automotive HID headlight drivers
• Projector lighting systems
• General HID lighting applications

Procurement Notes

Verify the part status as Not For New Designs before procurement planning. Confirm the 28-SSOP package type and 100kHz frequency requirements match the system design. Ensure the 10.5 V to 13.5 V supply voltage range aligns with the power architecture. Check RoHS3 compliance if environmental regulations apply to the final assembly.

Selection Notes

Select this component when a dedicated full-bridge controller for HID lamps is required. The 100kHz frequency and 28-SSOP package define the physical and electrical constraints. Consider the absence of dimming features if variable brightness control is needed. Verify the -40°C to 125°C temperature range meets the operational environment specifications.

Part Context

This component belongs to the NXP UBA203x series of lighting ballast controllers. It shares functional similarities with the UBA2037T but differs in pin count and package configuration. The UBA2036TS/N1,118 specifically utilizes a 28-SSOP package compared to the 24-SOIC variant found in related models.

Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. The UBA2037T is a related model but has a different pin count and package, requiring circuit redesign rather than direct substitution.