UMD13N-TP

Overview

The UMD13N-TP is a dual digital transistor from Micro Commercial Components, integrating one NPN and one PNP bipolar junction transistor within a single SOT-363-6 surface-mount package. This configuration provides a collector continuous current of 100 mA and a power dissipation rating of 150 mW. The device features typical input resistors of 4.7 kOhms for both transistors with a resistor ratio of 10. It operates at a maximum temperature of +150°C and exhibits a saturation voltage of 300 mV.

Feature Summary

• Integrates complementary NPN and PNP transistors in a compact six-pin SOT-363 package to reduce board space.
• Includes built-in base resistors to simplify circuit design and eliminate external biasing components.
• Supports high-temperature operation up to +150°C for robust performance in demanding environments.

Applications

• Switching applications requiring complementary logic control
• Driver circuits for low-power loads
• Signal level shifting between different voltage domains

Procurement Notes

Verify the specific ordering suffix and manufacturing date code against the official datasheet before procurement. Confirm RoHS compliance status through the manufacturer's latest documentation. Ensure the supplier provides genuine parts traceable to Micro Commercial Components to avoid counterfeit risks.

Selection Notes

Select this component when a matched NPN/PNP pair is required in a minimal footprint. The integrated 4.7 kOhm resistors suit standard logic interfaces. Verify that the 100 mA collector current and 150 mW power dissipation meet the thermal and load requirements of the target application.

Part Context

This part belongs to the UMD13N series of dual digital transistors. It shares the SOT-363 form factor with other variants but differs in internal resistor values and transistor configurations. It serves as a compact alternative to discrete transistor pairs in space-constrained designs.

Replacement Considerations

Check for direct pin-compatible substitutes such as the UMD16N-TP or UMD18N-TP, noting differences in internal resistance ratios. Verify electrical parameters like hFE and saturation voltage match the original design requirements before substitution.