UPC4574GR(5)-9LG-E1-A

$0.59

Description：LINEAR IC TSSOP OPERATION AMPLIF
Series：-
Mfr：Renesas Electronics Corporation
Package：Tape & Reel (TR)

SKU:3dbeab938d7c Category: Instrumentation, Op Amps, Buffer Amps Brand: Renesas Electronics Corporation

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

UPC4574GR(5)-9LG-E1-A is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Renesas Electronics Corporation. Its product description is LINEAR IC TSSOP OPERATION AMPLIF. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for UPC4574GR(5)-9LG-E1-A

Description：LINEAR IC TSSOP OPERATION AMPLIF
Series：-
Mfr：Renesas Electronics Corporation
Package：Tape & Reel (TR)
Amplifier Type：General Purpose
Number of Circuits：4
Output Type：Push-Pull
Slew Rate：6V/µs
Gain Bandwidth Product：14 MHz
Current - Input Bias：500 nA
Voltage - Input Offset：300 µV
Current - Supply：8.5mA (x4 Channels)
Current - Output / Channel：10 mA
Voltage - Supply Span (Min)：8 V
Voltage - Supply Span (Max)：32 V
Operating Temperature：-20°C ~ 80°C (TA)
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：14-TSSOP (0.173", 4.40mm Width)
Supplier Device Package：14-TSSOP
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for UPC4574GR(5)-9LG-E1-A

UPC4574GR(5)-9LG-E1-A

Instrumentation, Op Amps, Buffer Amps Overview

The UPC4574GR(5)-9LG-E1-A is a power operational amplifier manufactured by Renesas Electronics. It features four channels with a gain-bandwidth product of 14 MHz and a slew rate of 6 V/us. The input offset voltage is specified at 300 uV, with an input bias current of 1 uA. Operating supply voltage ranges from 4 V to 16 V, drawing 8.5 mA of quiescent current per channel. Output current capability is 10 mA per channel. Common-mode rejection ratio is 80 dB, and input voltage noise density is 5.5 nV/sqrt Hz. Input noise current density is 700 fA. The device operates within a temperature range of -20°C to +80°C and is housed in a SOP-14 package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

High-performance low-noise operational amplifier design
Power output capability for driving loads
Wide bandwidth and fast slew rate characteristics

Instrumentation, Op Amps, Buffer Amps Applications

Audio signal processing circuits
Instrumentation amplifiers
Active filter designs

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix GR(5)-9LG-E1-A against the manufacturer's latest datasheet to confirm pinout compatibility and electrical specifications. Ensure the operating environment stays within the -20°C to +80°C range. Check RoHS compliance status via official documentation before integration into regulated products.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when high output current and low noise are required in a multi-channel configuration. Compare GBP and slew rate against application signal frequencies. Verify supply voltage constraints fit the 4V to 16V range. Consider thermal management for SOP-14 packaging in dense layouts.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the UPC4574 series, which includes variants like UPC4574G2-E1-A and UPC4574GR-9LG-E1-A. These are general-purpose low-noise operational amplifiers. The GR(5) variant specifically denotes a power operational amplifier version with distinct electrical parameters compared to standard low-power counterparts in the same family.