VNS1NV04DPTR-E

$1.22

Description：IC PWR DRIVER N-CHANNEL 1:1 8SO
Series：OMNIFET II™, VIPower™
Mfr：STMicroelectronics
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:e5f887d7affe Category: Power Distribution Switches, Load Drivers Brand: STMicroelectronics

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

VNS1NV04DPTR-E is listed in the Power Distribution Switches, Load Drivers range at ChipApex. The manufacturer field lists STMicroelectronics. Its product description is IC PWR DRIVER N-CHANNEL 1:1 8SO. Review the specifications below when checking this part for your BOM.

Power Distribution Switches, Load Drivers specifications for VNS1NV04DPTR-E

Description：IC PWR DRIVER N-CHANNEL 1:1 8SO
Series：OMNIFET II™, VIPower™
Mfr：STMicroelectronics
Package：Tape & Reel (TR),Cut Tape (CT)
Switch Type：General Purpose
Number of Outputs：2
Ratio - Input:Output：1:01
Output Configuration：Low Side
Output Type：N-Channel
Interface：On/Off
Voltage - Load：36V (Max)
Voltage - Supply (Vcc/Vdd)：Not Required
Current - Output (Max)：1.7A
Rds On (Typ)：250mOhm (Max)
Input Type：Non-Inverting
Features：-
Fault Protection：Current Limiting (Fixed), Over Temperature, Over Voltage
Operating Temperature：-40°C ~ 150°C (TJ)
Mounting Type：Surface Mount
Supplier Device Package：8-SOIC
Package / Case：8-SOIC (0.154", 3.90mm Width)
Grade：-
Qualification：-

Power Distribution Switches, Load Drivers datasheet and documents for VNS1NV04DPTR-E

VNS1NV04DPTR-E

Power Distribution Switches, Load Drivers Overview

The VNS1NV04DPTR-E is a dual-channel smart power switch from the OMNIFET series, manufactured by STMicroelectronics. It integrates two N-channel MOSFET drivers in an 8-pin SOIC package. The device supports a maximum supply voltage of 55V and delivers up to 3.5A output current per channel. Key electrical parameters include a rise time of 500ns and a fall time of 600ns. It operates within a temperature range of -40°C to +150°C TJ.

Power Distribution Switches, Load Drivers Feature Summary

Integrates dual low-side MOSFET drivers for independent load control
Provides comprehensive protection against overcurrent, thermal overload, and overvoltage conditions
Features diagnostic feedback capability through input pin monitoring

Power Distribution Switches, Load Drivers Applications

Automotive lighting systems
General purpose load switching
Industrial control circuits

Power Distribution Switches, Load Drivers Procurement Notes

Verify the specific suffix 'DP' indicates dual-channel configuration distinct from single-channel variants like VNS1NV04PTR-E. Confirm RoHS compliance status and moisture sensitivity level requirements for your assembly process. Ensure the SOIC-8 footprint matches your PCB design constraints before finalizing procurement.

Power Distribution Switches, Load Drivers Selection Notes

Select this component when dual-channel isolation is required within a compact surface-mount form factor. Compare against single-channel alternatives if only one load needs driving. Consider the 3.5A continuous current rating against peak load demands. Verify that the 55V maximum voltage rating exceeds the system's highest potential supply spikes.

Power Distribution Switches, Load Drivers Part Context

This part belongs to the OMNIFET family, designed to replace standard discrete Power MOSFETs in applications up to 50 KHz. It utilizes VIPower technology to integrate protection features directly on-chip. The dual-driver architecture simplifies board layout compared to using separate components for each channel.