VO2611-X006

Overview

The VO2611-X006 is a high-speed logic output optoisolator manufactured by Vishay Semiconductor Opto Division. It features an NPN phototransistor output in an 8-DIP package with a 5300 Vrms isolation voltage. The device supports data rates up to 10 MBd, with typical rise and fall times of 23 ns and 7 ns respectively. Key electrical parameters include a maximum collector-emitter saturation voltage of 300 mV, a forward current of 10 mA, and a forward voltage of 1.4 V. It operates within a temperature range of -55°C to +110°C.

Feature Summary

• High-speed operation supporting data transmission rates up to 10 MBd
• High common-mode transient immunity for noise-resistant signal isolation
• Logic-compatible open-drain output configuration for direct interface with digital circuits

Applications

• High-speed serial communication interfaces
• Data acquisition systems requiring galvanic isolation
• Industrial control systems with noisy environments

Procurement Notes

Verify the specific suffix X006 confirms the 8-DIP through-hole package variant. Confirm RoHS compliance status via the official datasheet as requirements vary by region. Ensure the supplier provides the manufacturer's original datasheet for accurate timing and isolation specifications before integration into design files.

Selection Notes

Select this component when high-speed digital isolation is required alongside robust noise immunity. The 10 MBd rate suits applications exceeding standard optocoupler speeds. Verify that the open-drain output architecture aligns with the pull-up requirements of the receiving logic circuitry. Check thermal dissipation limits if operating near maximum junction temperatures.

Part Context

This part belongs to Vishay's high-speed optocoupler family, sharing architectural similarities with the 6N137 and VO2601 series. These devices are designed for applications demanding fast switching speeds and high isolation voltages. The VO2611 variant specifically offers enhanced performance characteristics compared to standard transistor-output optocouplers.

Replacement Considerations

Direct pin-compatible substitutes include the 6N137 and VO2601 series from Vishay. Verify that replacement parts maintain the same 10 MBd speed rating and 5300 Vrms isolation level. Ensure the output stage type matches the system requirements to avoid logic level incompatibilities.