X9313UPI

Description：IC DGTL POT 50KOHM 32TAP 8DIP
Series：XDCP™

SKU:10ff0a0092c7 Category: Digital Potentiometers Brand: Renesas Electronics Corporation

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

X9313UPI is listed in the Digital Potentiometers range at ChipApex. The manufacturer field lists Renesas Electronics Corporation. Its product description is IC DGTL POT 50KOHM 32TAP 8DIP. Review the specifications below when checking this part for your BOM.

Digital Potentiometers specifications for X9313UPI

Description：IC DGTL POT 50KOHM 32TAP 8DIP
Series：XDCP™
Mfr：Renesas Electronics Corporation
Package：Tube
Taper：Linear
Configuration：Potentiometer
Number of Circuits：1
Number of Taps：32
Resistance (Ohms)：50k
Interface：Up/Down (U/D, INC, CS)
Memory Type：Non-Volatile
Voltage - Supply：5V
Features：-
Tolerance：±20%
Temperature Coefficient (Typ)：±300ppm/°C
Mounting Type：Through Hole
Supplier Device Package：8-PDIP
Package / Case：8-DIP (0.300", 7.62mm)
Operating Temperature：-40°C ~ 85°C
Resistance - Wiper (Ohms) (Typ)：40

Digital Potentiometers datasheet and documents for X9313UPI

X9313UPI

Digital Potentiometers Overview

The X9313UPI is a nonvolatile digital potentiometer featuring a single circuit with 32 taps and a resistance value of 50 kOhms. It utilizes an Up/Down (U/D, INC, CS) serial interface for control. The device operates within a supply voltage range of 4.5 V to 5.5 V and supports a linear taper configuration. It is housed in an 8-pin PDIP package and functions across an industrial temperature range of -40°C to +85°C.

Digital Potentiometers Feature Summary

Nonvolatile memory retains wiper position settings without power
Three-wire serial interface enables simple control connections
Linear taper provides uniform resistance adjustment steps

Digital Potentiometers Applications

Volume control in audio equipment
Gain adjustment in signal processing circuits
Calibration of sensor signals
Voltage reference setting in measurement systems

Digital Potentiometers Procurement Notes

Verify the specific suffix 'UPI' corresponds to the 8-pin PDIP package and 50k Ohm resistance value. Confirm RoHS compliance status as historical data varies by production batch. Ensure the supplier source is authorized to guarantee component authenticity and proper storage conditions for the nonvolatile memory integrity.

Digital Potentiometers Selection Notes

Select this component when a through-hole DIP package is required for prototyping or legacy board designs. The 50k Ohm resistance and 32-tap resolution suit applications needing moderate precision. Verify that the 4.5V to 5.5V operating voltage aligns with the system logic levels and power supply constraints.

Digital Potentiometers Part Context

This part belongs to the XDCP series of digital potentiometers from Renesas Electronics. It shares core architectural features with other X9313 variants but differs in packaging and resistance values. The UPI suffix specifically denotes the plastic dual in-line package format suitable for breadboard use.