SEARCH
— IC芯片 | 连接器 | 传感器 | 被动器件 —
XC6204F192DR-G is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists Torex Semiconductor Ltd. Its product description is IC REG LINEAR 1.9V 300MA 6-USPB. Review the specifications below when checking this part for your BOM.
The XC6204F192DR-G is a fixed-output positive voltage LDO regulator manufactured by Torex Semiconductor using CMOS processes. It provides a nominal output voltage of 1.9V with ±1% accuracy and supports a maximum output current of 300mA. The device operates within an input voltage range of 2V to 10V and features a typical standby current of 0.01μA when disabled via the CE pin. It utilizes a USP-6B package and includes built-in phase compensation, allowing stable operation with low ESR ceramic capacitors.
Verify the specific ordering suffix DR-G corresponds to the USP-6B package format and reel quantity requirements. Confirm the F series designation aligns with the required active-high CE logic level without internal pull-down resistors. Ensure the 1% accuracy code matches the target 1.9V specification before finalizing procurement orders.
Select this component for applications requiring precise 1.9V regulation with high current capability up to 300mA. The F series type is suitable for designs needing active-high enable logic without internal pull-down resistors. Consider the low dropout characteristics and high ripple rejection for noise-sensitive portable electronics powered by single-cell batteries or varying supply rails.
This part belongs to the XC6204/XC6205 series of high-speed LDO regulators from Torex Semiconductor. The series is characterized by high precision, low noise, and compatibility with low ESR ceramic capacitors. The XC6204 variant specifically covers output voltages from 1.8V to 6.0V, distinguishing it from the lower voltage range of the XC6205 series.
XC6204F192MR-G (SOT-25 package)
The F series type features an Active High CE function with no internal pull-down resistor built-in.
Yes, a low ESR ceramic capacitor must be connected to the output pin. The datasheet suggests a 4.7μF capacitor for output voltages between 0.9V and 1.2V, though specific values for 1.9V should be verified against the application circuit guidelines.
Explore related parts through Power Management (PMIC), Integrated Circuits (ICs), all product categories, ChipApex homepage.