SEARCH
— IC芯片 | 连接器 | 传感器 | 被动器件 —
XC6204F292MR-G is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists Torex Semiconductor Ltd. Its product description is IC REG LIN 2.9V 300MA SOT-25-5. Review the specifications below when checking this part for your BOM.
The XC6204F292MR-G is a positive voltage Low Dropout (LDO) regulator from the Torex Semiconductor XC6204 series. It provides a fixed output voltage of 2.9V with ±2% accuracy. The device supports a maximum output current of 300mA and operates within an input voltage range of 2V to 10V. Key electrical parameters include a typical supply current of 70μA, a standby current of 0.01μA, and a power supply rejection ratio of 70dB at 10kHz. It features a dropout voltage of approximately 80mV at 30mA load. The component utilizes an SOT-25-5 package and includes ON/OFF control functionality via the CE pin.
Verify the specific ordering suffix MR-G confirms the SOT-25 package and reel quantity. Ensure the F type designation matches the required active-high CE logic without internal pull-down resistors. Confirm RoHS compliance and halogen-free status aligns with project environmental requirements before finalizing procurement.
Select this part for applications requiring a fixed 2.9V rail with moderate current demands up to 300mA. The F type is suitable where active-high enable logic is preferred without internal biasing resistors. Consider the 70μA supply current for battery-operated devices and verify thermal dissipation capabilities on the PCB layout for the SOT-25 package.
This component belongs to the XC6204 series of high-speed LDO regulators manufactured by Torex Semiconductor using CMOS processes. The series offers selectable output voltages in precise steps and is designed for portable electronic equipment requiring stable power delivery with minimal noise and high ripple rejection characteristics.
XC6204B292MR-G
The XC6204F series uses Active High logic for the CE pin, meaning a High level turns the output ON and a Low level turns it OFF.
Yes, the datasheet suggests connecting an output capacitor (CL) to ensure the effectiveness of the built-in phase compensation, particularly when using low ESR ceramic capacitors.
Explore related parts through Power Management (PMIC), Integrated Circuits (ICs), all product categories, ChipApex homepage.