SEARCH
— IC芯片 | 连接器 | 传感器 | 被动器件 —
XC6503A391MR-G is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists Torex Semiconductor Ltd. Its product description is IC REG LINEAR 3.9V 500MA SOT-25. Review the specifications below when checking this part for your BOM.
The XC6503A391MR-G is a CL capacitor-less 500mA high-speed CMOS LDO regulator manufactured by Torex Semiconductor. It provides a fixed output voltage of 3.9V with an accuracy of ±1% for voltages between 2.0V and 5.0V. The device operates within an input voltage range of 1.7V to 6.0V and features internal phase compensation, eliminating the need for external load capacitors. Key electrical characteristics include a typical supply current of 15μA, a dropout voltage of approximately 190mV at 300mA, and a power supply rejection ratio (PSRR) of 55dB at 1kHz. It incorporates fold-back current limiting, short-circuit protection, and thermal shutdown circuits.
Verify the specific package type SOT-25 and the ordering suffix MR-G against official distributor catalogs or manufacturer datasheets to ensure correct component identification. Confirm that the A-series designation matches the required CE pin functionality and pull-down resistor specifications before finalizing procurement orders.
Select this component when a fixed 3.9V output is required in space-constrained designs where external output capacitors are undesirable. The A-series variant is suitable for applications needing a chip enable pin without an internal pull-down resistor. Ensure the input voltage remains within the 1.7V to 6.0V range and consider the thermal dissipation capabilities of the SOT-25 package under maximum load conditions.
This part belongs to the XC6503 series of low-dropout regulators from Torex Semiconductor. The series is characterized by its ability to operate stably without a load capacitor, saving board space. The XC6503A variant specifically includes a chip enable pin but lacks the internal pull-down resistor found in C and D types, offering flexibility in logic interface design.
XC6503A391PR-G
No, the device utilizes internal phase compensation, allowing it to operate stably without an external load capacitor.
The CE pin allows the entire circuit to be turned off via a low-level input signal, enabling low-power standby mode.
Explore related parts through Power Management (PMIC), Integrated Circuits (ICs), all product categories, ChipApex homepage.