XCZU4CG-1SFVC784I

Soc System On Chip Overview

The AMD XCZU4CG-1SFVC784I is a Zynq UltraScale+ MPSoC from the CG series, integrating dual-core ARM Cortex-A53 and dual-core ARM Cortex-R5 processors with programmable logic. It features approximately 192K logic cells, 16 GTH transceivers, and 256 I/Os in a 784-FCBGA package. The device operates at maximum clock frequencies of 600 MHz for the A53 cores and 1.5 GHz for the R5 cores, with an operating voltage of 850 mV. It supports industrial temperatures from -40°C to +100°C.

Soc System On Chip Feature Summary

• Dual-core ARM Cortex-A53 MPCore application processor
• Dual-core ARM Cortex-R5F real-time processor
• Approximately 192K logic cells and 16 GTH transceivers
• Integrated DDR4/LPDDR4/DDR3/LPDDR3 memory interfaces

Soc System On Chip Applications

• Industrial motor control
• Sensor processing and fusion
• Low-cost ultrasound systems
• Traffic engineering applications

Soc System On Chip Procurement Notes

Verify component authenticity through authorized AMD distributors or direct manufacturer channels. Confirm RoHS compliance status and moisture sensitivity level (MSL) prior to PCB assembly. Ensure storage conditions meet JEDDEC standards to prevent damage before reflow soldering.

Soc System On Chip Selection Notes

Select this model for designs requiring dual-core processing with moderate FPGA resources. Compare against the EG series if video codecs or four-core processing are needed. Verify that the 784-pin FCBGA footprint matches the board layout constraints and thermal requirements.

Soc System On Chip Part Context

This part belongs to the Zynq UltraScale+ MPSoC CG family, designed for cost-sensitive industrial and infrastructure applications. It shares the same silicon architecture as other CG variants but differs in speed grades and packaging options within the 784-pin form factor.

Soc System On Chip Replacement Considerations

Direct pin-to-pin replacements include other speed grades within the XCZU4CG series, such as XCZU4CG-2SFVC784I. Cross-series migration to EG or EV models requires schematic and software adaptation due to core count and peripheral differences.