XFEB201209-110-6A

Overview

The XFEB201209-110-6A is a ferrite bead chip manufactured by XFMRS. It provides an impedance of 11 Ohms at 100 MHz with a maximum DC resistance of 10mOhm. The component supports a current rating of 6A and operates within a temperature range of -55°C to 125°C. It holds AEC-Q200 ratings for automotive reliability.

Feature Summary

• Provides electromagnetic interference suppression through high-frequency impedance characteristics.
• Designed for automotive applications meeting AEC-Q200 qualification standards.
• Capable of handling high continuous current loads with minimal DC voltage drop.

Applications

• Automotive electronic circuit filtering
• High-current power line noise suppression
• Signal integrity protection in automotive modules

Procurement Notes

Verify the specific suffix '6A' corresponds to the required 6A current rating during procurement. Confirm that the package type matches the target PCB footprint. Ensure the supplier provides documentation verifying AEC-Q200 compliance for automotive deployment. Check lead times as automotive-grade components may have longer availability windows than commercial grades.

Selection Notes

Select this component when a low DC resistance is critical for power efficiency alongside significant noise attenuation at 100 MHz. The 6A rating makes it suitable for main power rails rather than signal lines. Verify that the operating temperature range covers the intended environment, specifically noting the -55°C lower limit for harsh automotive conditions.

Part Context

This part belongs to the XFEB201209 series from XFMRS, which offers various impedance and current combinations. The series is designed for surface-mount applications requiring robust performance in noisy environments. The numbering convention typically indicates impedance value and current capacity, allowing engineers to quickly identify suitable variants for specific power and filtering requirements.

Replacement Considerations

Direct substitutes must match the 11 Ohm @ 100 MHz impedance and 6A current rating. Verify package dimensions and terminal configuration compatibility before substitution. Ensure any replacement also meets AEC-Q200 standards if used in automotive contexts. Cross-reference datasheets for thermal derating curves to confirm equivalent performance under load.