XVDEECNANF-16.000000

Crystals Overview

The Taitien XVDEECNANF-16.000000 is a parallel fundamental quartz crystal operating at a nominal frequency of 16 MHz. It features a frequency tolerance and stability of ±30 ppm, with a load capacitance of 12 pF and an equivalent series resistance (ESR) of 50 Ohms. The component utilizes a 4-SMD, no-lead surface-mount package measuring 2.5 mm in length, 2.0 mm in width, and 0.6 mm in height. It supports an operating temperature range from -20°C to +70°C and complies with RoHS3 standards.

Crystals Feature Summary

• Ultra-thin ceramic package design for compact surface-mount applications
• Parallel fundamental oscillation mode ensuring stable frequency generation
• Lead-free construction compliant with environmental regulations

Crystals Applications

• Microcontroller clock circuits
• Communication module timing references
• Consumer electronics control boards

Crystals Procurement Notes

Verify the specific load capacitance requirement of the target circuit against the component's 12 pF specification to ensure accurate frequency operation. Confirm that the PCB footprint matches the 2.5 x 2.0 mm SMD dimensions. Ensure the selected variant meets the required temperature range for the intended application environment.

Crystals Selection Notes

Select this component when a standard 16 MHz reference is required for general-purpose digital logic or communication interfaces. Consider the ±30 ppm tolerance sufficient for most non-critical timing applications. Evaluate the 50 Ohm ESR against the oscillator circuit's drive level requirements to prevent over-driving the crystal.

Crystals Part Context

This part belongs to the Taitien XV series of miniature surface-mount crystals. The series is characterized by small form factors suitable for space-constrained designs. The XVDEECNANF-16.000000 specifically denotes a 16 MHz unit within this family, sharing common packaging and electrical characteristics with other frequencies in the lineup.

Crystals Replacement Considerations

Direct substitutes must match the 16 MHz frequency, 12 pF load capacitance, and 4-SMD 2.5x2.0mm package. Verify compatibility with existing oscillator circuits regarding ESR and drive level specifications before substitution.