XVDGHHNANF-27.000000

Crystals Overview

The Taitien XVDGHHNANF-27.000000 is a surface-mount MHz crystal designed for frequency control applications. It operates at a nominal frequency of 27 MHz with a load capacitance of 12 pF. The component offers a frequency tolerance of ±50 ppm and a stability of ±100 ppm. It features an equivalent series resistance (ESR) of 45 Ohms and utilizes a 4-SMD, No Lead package. The device supports fundamental mode operation and is rated for commercial temperature ranges.

Crystals Feature Summary

• Surface-mount construction in a compact 4-SMD no-lead package
• Fundamental mode resonance for stable frequency generation
• Integrated design suitable for automated assembly processes

Crystals Applications

• General-purpose clock signal generation in consumer electronics
• Frequency reference sources in communication modules
• Timing circuits in embedded systems requiring 27 MHz input

Crystals Procurement Notes

Verify the specific frequency tolerance and ESR requirements against the target circuit design before procurement. Confirm that the 12 pF load capacitance aligns with the host oscillator's specifications to ensure accurate frequency performance. Check for RoHS compliance status if environmental regulations apply to the final product assembly.

Crystals Selection Notes

Select this component when a 27 MHz fundamental crystal with 12 pF load capacitance is required. Ensure the application environment falls within the specified operating temperature range. Compare the 45 Ohm ESR against the oscillator circuit's drive level limitations to prevent over-driving the crystal. Consider the 4-SMD footprint compatibility with existing PCB layouts.

Crystals Part Context

This part belongs to the Taitien line of passive quartz crystals. It serves as a passive frequency-determining element, distinct from active oscillators which include internal circuitry. The component relies on external oscillator circuits to generate square wave signals. It is commonly used in applications where cost-effective, stable timing references are needed for digital logic synchronization.

Crystals Replacement Considerations

Direct substitutes must match the 27 MHz frequency, 12 pF load capacitance, and 4-SMD no-lead package dimensions. Verify that alternative manufacturers offer comparable ESR values around 45 Ohms and similar frequency stability ratings. Ensure the replacement part supports fundamental mode operation and fits the same thermal and electrical constraints.