XVHEELNANF-8.000000

Crystals Overview

The Taitien XVHEELNANF-8.000000 is a parallel fundamental quartz crystal operating at a nominal frequency of 8 MHz. It features a load capacitance of 20 pF and an equivalent series resistance (ESR) of 100 Ohms. The component exhibits a frequency tolerance of ±30 ppm and a frequency stability of ±30 ppm. Designed for surface mount applications, it utilizes a 4-SMD, no lead package configuration.

Crystals Feature Summary

• Parallel fundamental resonance mode operation
• Ultra-thin ceramic package construction
• Surface mount installation type

Crystals Applications

• General purpose clock signal generation
• Microcontroller timing circuits
• Embedded system reference clocks

Crystals Procurement Notes

Verify the specific package dimensions and terminal finish against the official manufacturer datasheet prior to integration. Confirm that the 100 Ohm ESR specification aligns with the oscillator circuit design requirements. Ensure the ±30 ppm tolerance meets the system's overall frequency accuracy budget. Cross-reference the RoHS compliance status with current regulatory standards for the target market.

Crystals Selection Notes

Select this component when a standard parallel resonant crystal is required for cost-sensitive designs. The 20 pF load capacitance is suitable for common microcontroller interfaces. Consider the 100 Ohm ESR value for driving level compatibility. This part is appropriate for applications where moderate frequency stability is sufficient and space constraints allow for the specified SMD footprint.

Crystals Part Context

This component belongs to Taitien's standard quartz crystal portfolio, which supports various consumer and industrial electronics. The XV series typically denotes a specific family of thin-profile crystals designed for automated assembly. Taitien provides these components as part of a broader range of frequency control products including oscillators and temperature-compensated variants.

Crystals Replacement Considerations

Substitute parts must match the 8 MHz frequency, 20 pF load capacitance, and 4-SMD no-lead package. Verify that alternative manufacturers offer comparable ±30 ppm tolerance and 100 Ohm ESR specifications. Ensure the replacement maintains identical physical dimensions to fit existing PCB footprints without mechanical interference.