XZBPELAANF-30.000000

Crystals Overview

The XZBPELAANF-30.000000 is a fundamental mode crystal resonator manufactured by Taitien, designed for surface-mount applications. It operates at a nominal frequency of 30 MHz with a frequency tolerance of ±15 ppm and stability of ±30 ppm. The component features a load capacitance of 9 pF and an equivalent series resistance (ESR) of 80 Ohms. It utilizes a 4-SMD, no-lead package with dimensions of 2.55 mm x 2.05 mm and a maximum height of 0.60 mm. The device supports base harmonic operation and is rated for an operating temperature range of -40°C to 85°C.

Crystals Feature Summary

• Provides precise frequency generation in a compact surface-mount footprint
• Ensures stable oscillation with low equivalent series resistance
• Complies with automotive reliability standards including AEC-Q200

Crystals Applications

• Automotive electronic control units
• Microcontroller clock sources
• Communication interface circuits

Crystals Procurement Notes

Verify the specific suffix configuration against the manufacturer's official part number guide to ensure correct load capacitance and tolerance specifications. Confirm that the required operating temperature range aligns with the -40°C to 85°C rating documented for this variant. Cross-reference the package dimensions with the PCB footprint library to guarantee mechanical compatibility during assembly.

Crystals Selection Notes

Select this component when a 30 MHz reference signal is required with tight initial tolerance. Ensure the circuit design accommodates the specified 9 pF load capacitance to maintain frequency accuracy. Consider the thermal environment to verify compliance with the extended temperature range. Validate that the ESR value matches the oscillator circuit requirements for reliable startup.

Crystals Part Context

This model belongs to Taitien's miniature SMD crystal series, characterized by small form factors suitable for dense PCB layouts. The XZ series typically targets high-volume consumer and industrial electronics. This specific part integrates leadless termination technology to enhance solder joint reliability and facilitate automated placement processes.

Crystals Replacement Considerations

Direct substitutes must match the 30 MHz frequency, 9 pF load capacitance, and 4-SMD no-lead package. Verify that alternative components meet the same ±15 ppm tolerance and 80 Ohm ESR specifications. Ensure any replacement maintains the -40°C to 85°C operating range and AEC-Q200 qualification if used in automotive contexts.