4N27XSMT&R

$0.57

Description：OPTOISO 5.3KV 1CH TRANS W/BASE
Series：4N27
Mfr：Isocom Components 2004 LTD
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:844771d41a44 Category: Transistor, Photovoltaic Output Optoisolators Brand: Isocom Components 2004 LTD

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

Product Detailed Parameters

Description：OPTOISO 5.3KV 1CH TRANS W/BASE
Series：4N27
Mfr：Isocom Components 2004 LTD
Package：Tape & Reel (TR),Cut Tape (CT)
Number of Channels：1
Voltage - Isolation：5300Vrms
Current Transfer Ratio (Min)：10% @ 10mA
Current Transfer Ratio (Max)：-
Turn On / Turn Off Time (Typ)：-
Rise / Fall Time (Typ)：2µs, 2µs
Input Type：DC
Output Type：Transistor with Base
Voltage - Output (Max)：30V
Current - Output / Channel：50mA
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：60 mA
Vce Saturation (Max)：500mV
Operating Temperature：-55°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：6-SMD, Gull Wing
Supplier Device Package：-
Grade：-
Qualification：-

Download product information

4N27XSMT&R

Overview

The 4N27XSMT&R is a surface-mount optocoupler manufactured by Isocom Components 2004 LTD. It features a single channel with a phototransistor output and base terminal. The device utilizes a 6-pin Surface Mount PDIP package. Key electrical specifications include a maximum forward voltage of 1.65V, a maximum input current of 60 mA, and an isolation voltage of 5.3 kVrms. The typical rise time is 2µs, while the typical fall time is 11µs. The current transfer ratio ranges from a minimum of 10% to a maximum of 80%. Input current type is DC.

Feature Summary

Integrates an infrared emitting diode with a phototransistor having a base terminal for enhanced switching control.

Applications

Signal isolation in digital communication interfaces
Gate drive circuits for power electronics
Microcontroller input/output isolation

Procurement Notes

Verify the specific suffix 'SMT&R' confirms the surface mount tape and reel packaging configuration. Confirm that the manufacturer designation matches Isocom Components 2004 LTD to ensure component authenticity and compliance with specified electrical tolerances.

Selection Notes

Select this component when a surface-mount solution is required for single-channel isolation with a phototransistor output featuring a base pin. Ensure the 5.3 kVrms isolation rating meets system safety requirements and the 60 mA input current limit aligns with driving circuit capabilities.

Part Context

This part belongs to the 4N27 series of optically coupled isolators. It serves as a surface-mount variant designed for applications requiring galvanic isolation between low-voltage control circuits and higher-voltage load circuits.

Replacement Considerations

Compatible substitutes include other 4N27-series surface-mount variants from different manufacturers, provided they match the 6-pin SMD package, phototransistor output with base, and equivalent electrical ratings.