74AUP1G08GM,115

Overview

The Nexperia 74AUP1G08GM,115 is a single 2-input AND gate in the AUP logic family. It operates within a supply voltage range of 0.8 V to 3.6 V and features Schmitt-trigger inputs for noise immunity. The device utilizes IOFF circuitry to prevent backflow current during partial power-down states. It is housed in an XSON6 (SOT886) package with dimensions of 1 x 1.45 x 0.5 mm. Static supply current is limited to 0.9 μA maximum at 25 °C. Propagation delay ranges from 2.2 ns to 4.2 ns typical values depending on load capacitance and voltage.

Feature Summary

• Schmitt-trigger action provides tolerance for slower input rise and fall times.
• IOFF circuitry enables partial power-down mode by disabling outputs to prevent damaging backflow currents.
• CMOS construction ensures low static and dynamic power consumption across the full voltage range.
• Inputs are overvoltage tolerant up to 3.6 V.

Applications

• Partial power-down applications requiring controlled output disablement
• Low-voltage digital logic systems operating between 0.8 V and 3.6 V
• Signal processing circuits requiring high noise immunity

Procurement Notes

Verify the specific ordering suffix

Selection Notes

Select this component when space-constrained designs require a single AND gate with Schmitt-trigger inputs. The XSON6 package offers a small footprint suitable for portable electronics. Ensure the application voltage remains within the 0.8 V to 3.6 V range to maintain specified performance characteristics and leakage limits.

Part Context

This part belongs to the Nexperia 74AUP series of low-power CMOS logic devices. The series is designed for battery-powered applications due to its wide voltage range and minimal power dissipation. The GM suffix specifically denotes the XSON6 plastic extremely thin small outline package variant without leads.

Replacement Considerations

Other packages within the same logical function include 74AUP1G08GW (TSSOP5), 74AUP1G08GN (XSON6 SOT1115), and 74AUP1G08GS (XSON6 SOT1202). Verify pin compatibility and thermal requirements before substituting.