74LV32AT14-13

Inverter Gates Overview

The 74LV32AT14-13 is a quadruple 2-input OR gate manufactured by Diodes Incorporated in a TSSOP-14 package. It operates within a supply voltage range of 2.0V to 5.5V and features inputs tolerant to 5.5V for mixed-voltage environments. The device includes I_OFF circuitry to support partial power-down applications by disabling outputs to prevent backflow current. It provides standard push-pull outputs capable of sinking or sourcing 12mA at VCC = 4.5V.

Inverter Gates Feature Summary

• Schmitt trigger action at all inputs
• I_OFF supports partial-power down operation
• ESD protection exceeds 2000-V Human Body Model

Inverter Gates Applications

• General Purpose Logic
• Power Down Signal Isolation
• Voltage translation applications

Inverter Gates Procurement Notes

Verify the specific ordering suffix 'T14' corresponds to the TSSOP-14 package configuration required for your design. Confirm that the -13 suffix aligns with the specified tape and reel packaging quantity of 2500 units. Ensure compatibility with the recommended operating conditions, specifically the input voltage tolerance up to 5.5V and the supply voltage range of 2.0V to 5.5V.

Inverter Gates Selection Notes

Select this component when mixed-voltage logic interfacing is required due to its 5.5V tolerant inputs. The inclusion of Schmitt triggers makes it suitable for noisy environments requiring clean signal transitions. Verify that the 12mA output drive capability meets the load requirements of the destination circuits at the target supply voltage.

Inverter Gates Part Context

This part belongs to the 74LV32A series of quadruple 2-input OR gates from Diodes Incorporated. It is functionally equivalent to other industry-standard LV32 devices but is packaged in a TSSOP-14 form factor. The series is designed for low-power CMOS applications requiring wide supply voltage flexibility.

Inverter Gates Replacement Considerations

Direct substitutes include the 74LV32AS14-13 (SO-14 package) and generic 74LV32 equivalents from other manufacturers, provided pinouts and electrical characteristics match.