A3P015-2QNG68

Field Programmable Gate Array Overview

The A3P015-2QNG68 is a ProASIC3 Flash Field Programmable Gate Array manufactured by Microsemi. It features 15,000 system gates and 384 configurable logic blocks (CLBs). The device operates at a maximum clock frequency of 350 MHz and utilizes a 130-nm flash-based CMOS process. It is housed in a QN68 package with 68 pins, measuring 8 mm x 8 mm. The component supports an industrial temperature range from -40°C to +100°C.

Field Programmable Gate Array Feature Summary

• Instant On Level 0 support enables immediate system operation without external boot PROMs.
• Nonvolatile flash technology retains programmed designs when powered off.
• Integrated 1 kbit FlashROM provides user-accessible nonvolatile storage.
• Supports secure In-System Programming using AES decryption.

Field Programmable Gate Array Applications

• Time-critical systems requiring instant power-on functionality
• Secure embedded control applications
• Industrial automation controllers

Field Programmable Gate Array Procurement Notes

Verify the specific ordering suffix against official Microsemi documentation to confirm package type, speed grade, and temperature rating. Ensure compliance with current RoHS standards and check for any obsolescence notices regarding the A3P015 series before procurement.

Field Programmable Gate Array Selection Notes

This device belongs to the entry-level density tier of the ProASIC3 family. Designers should note that A3P015 devices lack integrated PLLs and embedded SRAM blocks found in higher-density variants. Verify pin compatibility if migrating from other packages within the same family.

Field Programmable Gate Array Part Context

The A3P015-2QNG68 is part of the ProASIC3 Flash family, which bridges the gap between CPLDs and high-density FPGAs. This specific model represents the lowest gate count option, designed for cost-sensitive applications where nonvolatility and low power are primary requirements.

Field Programmable Gate Array Replacement Considerations

Microsemi explicitly states that the A3P015 is not recommended for new designs. Consider upgrading to the A3P030 or the ProASIC3E family for enhanced features such as embedded memory and PLLs while maintaining pin compatibility.