ChipApex | Global Electronic Components Supplier
AD8569ARM-REEL
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
Product Detailed Parameters
- Description：IC BUFFER AMP QUAD R-R 10-MSOP
- Series：-
- Mfr：Analog Devices Inc.
- Package：Bulk
- Amplifier Type：Buffer
- Number of Circuits：4
- Output Type：Rail-to-Rail
- Slew Rate：6V/µs
- Gain Bandwidth Product：-
- Current - Input Bias：80 nA
- Voltage - Input Offset：2 mV
- Current - Supply：700µA (x2 Channels)
- Current - Output / Channel：-
- Voltage - Supply Span (Min)：4.5 V
- Voltage - Supply Span (Max)：16 V
- Operating Temperature：-40°C ~ 85°C
- Grade：-
- Qualification：-
- Mounting Type：Surface Mount
- Package / Case：10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
- Supplier Device Package：10-MSOP
- -3db Bandwidth：6 MHz
Download product information
Overview
The AD8569ARM-REEL is a quad buffer amplifier from Analog Devices, built on a high voltage CBCMOS process. It operates on a single supply of 4.5 V to 16 V with rail-to-rail input and output capability. Key electrical parameters include a maximum offset voltage of 10 mV, a slew rate of 6 V/µs, and a bandwidth of 6 MHz. The device provides 35 mA continuous output current and can drive capacitive loads up to 1 µF. Supply current per amplifier is typically 700 µA at 25°C.
Feature Summary
- Rail-to-rail input and output operation for maximum dynamic range
- High capacitive load drive stability without oscillation
- Immunity to output phase reversal during overvoltage conditions
Applications
- LCD reference drivers
- Portable electronics signal buffering
- Communications equipment interface circuits
Procurement Notes
Verify the specific ordering suffix RM-10 corresponds to the 10-lead MSOP package configuration required for your PCB layout. Confirm that the REEL designation matches your automated assembly tape and reel specifications. Ensure the component meets RoHS compliance requirements if applicable to your manufacturing standards.
Selection Notes
Select this component when a quad buffer configuration is required within a single package to save board space. It is suitable for applications demanding high output current drive and stability under large capacitive loads. Consider the 10-lead MSOP package constraints regarding thermal dissipation and pin pitch compatibility during the design phase.
Part Context
This part belongs to the AD856x family of low-cost, single-supply buffer amplifiers designed for LCD monitor applications. The AD8569 specifically integrates four independent buffers, distinguishing it from the dual-channel AD8568 and octal-channel AD8570 variants within the same product line.
Replacement Considerations
Direct substitutes within the same family include the AD8568ART-REEL (dual channel) and AD8570ACP-REEL (octal channel). Verify pinout compatibility and functional equivalence before swapping between different channel counts in the series.
