ADTC114YUAQ-13

Single, Pre-Biased Bipolar Transistors Overview

The ADTC114YUAQ-13 is an NPN pre-biased small signal surface mount transistor manufactured by Diodes Incorporated. It features built-in biasing resistors with nominal values of R1=10kΩ and R2=47kΩ. The device operates within a supply voltage range up to 50V and supports a continuous collector current of 70mA, with a peak limit of 100mA. Power dissipation reaches 330mW at +25°C ambient temperature. It is housed in an SOT-323 package and qualified to AEC-Q101 standards for automotive applications.

Single, Pre-Biased Bipolar Transistors Feature Summary

• Epitaxial planar die construction with integrated biasing resistors
• Qualified to AEC-Q101 standards for high reliability
• Totally lead-free and fully RoHS compliant
• Halogen and antimony free green device

Single, Pre-Biased Bipolar Transistors Applications

• Automotive electronic circuits requiring AEC-Q101 compliance
• General-purpose switching applications
• Driver circuits for low-power loads

Single, Pre-Biased Bipolar Transistors Procurement Notes

Verify the specific ordering suffix '-13' corresponds to the 10,000-unit reel quantity when sourcing. Confirm that the component meets the required automotive qualification standards if used in safety-critical systems. Ensure proper handling procedures are followed during assembly due to the surface mount package type.

Single, Pre-Biased Bipolar Transistors Selection Notes

Select this component for designs requiring an NPN digital transistor with a 10kΩ base resistor. Verify that the SOT-323 package dimensions fit the PCB layout constraints. Check thermal derating curves if operating above +25°C ambient temperature to ensure power dissipation limits are not exceeded.

Single, Pre-Biased Bipolar Transistors Part Context

This part belongs to the ADTC114 series of pre-biased transistors from Diodes Incorporated. The 'YU' designation indicates the SOT-323 package style, while the 'AQ' suffix denotes AEC-Q101 automotive qualification. The '-13' suffix specifies the tape and reel packaging configuration.

Single, Pre-Biased Bipolar Transistors Replacement Considerations

Cross-reference with other NPN pre-biased transistors in the SOT-323 package. Ensure replacement parts match the 10kΩ/47kΩ resistor ratio and meet AEC-Q101 requirements if automotive grade is necessary.