AIP5D10K060Q1

Overview

The AIP5D10K060Q1 is a 23-pin IPM-5 module containing a three-phase inverter with Trench Shielded Planar Gate IGBTs rated at 600V and 10A. It integrates HVIC drivers, bootstrap diodes with current-limiting resistors, and protection circuits including UVLO, over-temperature (OT), and short-circuit current (CSC). The isolation rating is 2000Vrms/min.

Feature Summary

• Integrated three-phase inverter with built-in HVIC drivers
• Built-in bootstrap diodes with integrated current-limiting resistors
• Protection features include under-voltage lockout, over-temperature detection, and short-circuit current protection
• Wide input interface with Schmitt trigger receiver circuit

Applications

• AC 100-240Vrms class low power motor drives
• Refrigerator compressor motors
• Washing machine drive systems
• Air-conditioner fan and compressor motors

Procurement Notes

Verify the specific suffix (e.g., Q1 vs Q1S) to ensure correct pin length compatibility with your PCB footprint. Confirm that the application voltage does not exceed the 400V maximum supply rating. Ensure thermal management meets the junction temperature requirements for continuous operation.

Selection Notes

Select this component for applications requiring integrated gate driving and protection within a compact form factor. Verify that the control logic operates within the specified 3-18V wide input interface range. Ensure the system design accommodates the required dead-time and PWM frequency limits of 20 kHz.

Part Context

This Intelligent Power Module belongs to the AIP5 series from Alpha & Omega Semiconductor. It utilizes a 23-PowerDIP package designed for through-hole mounting. The module combines power switching elements with control logic to simplify the design of three-phase motor control systems.

Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation.

FAQ

How is the over-temperature protection function configured?

Connecting a 10kΩ resistor to the VOT pin enables temperature monitoring. Leaving the VOT pin open activates the internal over-temperature shutdown function.

Which phases support short-circuit current protection?

Short-circuit current protection is implemented only for the low-side IGBTs using an external shunt resistor and RC filter connected to the CSC pin.

What is the fault output signal behavior during different failure modes?

For short-circuit faults, the FO pulse width is a fixed minimum of 20µs. For under-voltage or over-temperature faults, the FO signal remains active until the condition recovers.