ChipApex | Global Electronic Components Supplier
AS2376QM8-13
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
Product Detailed Parameters
- Description：OPAMP GENERAL PURPOSE MSOP-8 T&R
- Series：-
- Mfr：Diodes Incorporated
- Package：Tape & Reel (TR),Cut Tape (CT)
- Amplifier Type：Standard
- Number of Circuits：2
- Output Type：Single Ended, Rail-to-Rail
- Slew Rate：2V/µs
- Gain Bandwidth Product：5.5 MHz
- Current - Input Bias：0.2 pA
- Voltage - Input Offset：5 µV
- Current - Supply：760µA (x2 Channels)
- Current - Output / Channel：50 mA
- Voltage - Supply Span (Min)：2.2 V
- Voltage - Supply Span (Max)：5.5 V
- Operating Temperature：-40°C ~ 125°C (TA)
- Grade：Automotive
- Qualification：AEC-Q100
- Mounting Type：Surface Mount
- Package / Case：8-TSSOP, 8-MSOP (0.118", 3.00mm Width)
- Supplier Device Package：8-MSOP
- -3db Bandwidth：-
Download product information
Overview
The AS2376QM8-13 is a dual precision operational amplifier in an MSOP-8 package. It features a 5.5MHz gain bandwidth product and low noise of 9.5nV/√Hz at 1kHz. The device operates on a single supply from 2.2V to 5.5V with quiescent current up to 950μA per amplifier. It offers rail-to-rail input and output, low offset voltage (max 25μV), and high PSRR. Qualified to AEC-Q100 Grade 1 for automotive use.
Feature Summary
- Post-package trim optimization for microvolt-level precision offset voltage
- Rail-to-rail input and output capability for maximum dynamic range
- Automotive-grade qualification with PPAP support under IATF 16949 standards
Applications
- Vehicle occupant detection sensors
- Battery management systems (BMS)
- DC-DC converters
- Position sensors
Procurement Notes
Verify the specific M8 suffix confirms the MSOP-8 package configuration required for your PCB layout. Confirm that the -13 tape and reel packing quantity aligns with your manufacturing volume needs. Ensure design compliance with the specified operating temperature range of -40°C to +125°C for target applications.
Selection Notes
Select this component when high precision and low noise are critical alongside moderate bandwidth requirements. The rail-to-rail architecture suits single-supply designs where signal swing maximization is necessary. Consider the thermal resistance characteristics of the MSOP-8 package for heat dissipation planning in dense layouts.
Part Context
This part belongs to the AS2376Q family of low-noise, low-quiescent current precision operational amplifiers manufactured by Diodes Incorporated. The series is designed for filtering and control applications requiring stability and accuracy without the bandwidth limitations typical of chopper-stabilized amplifiers.
Replacement Considerations
Direct pin-compatible replacements within the same family include the AS2376QS-13 variant, which utilizes an SO-8 package instead of MSOP-8. Verify package dimensions and thermal performance differences before substituting.
