AT17LV010-10PC

Configuration PROMs For FPGAs Overview

The AT17LV010-10PC is a 1-Mbit (131,072 x 1-bit) serial EEPROM configurator designed for FPGA configuration. It operates with both 3.3V and 5.0V supplies and supports In-System Programming via a Two-Wire bus. The device features a simple serial interface compatible with SRAM-based FPGAs in Master Serial mode. It includes programmable reset polarity, write protection mechanisms, and cascading capabilities through the CEO output pin. The component is housed in an 8-lead PDIP package.

Configuration PROMs For FPGAs Feature Summary

• Supports dual voltage operation at 3.3V and 5.0V
• Enables In-System Programming via Two-Wire Serial Bus
• Features programmable reset polarity and write protection
• Allows cascading for expanded memory configurations

Configuration PROMs For FPGAs Applications

• Configuration of Xilinx XC3000, XC4000, and Spartan FPGAs
• Configuration of Altera FLEX and APEX devices
• Configuration of Atmel AT6000, AT40K, and AT94K devices
• Cascaded FPGA array configuration systems

Configuration PROMs For FPGAs Procurement Notes

Verify that the ordering suffix 'PC' corresponds to the 8-lead PDIP package and Commercial temperature range as specified in the official Microchip/Atmel datasheet. Confirm compatibility with the target FPGA's Master Serial mode requirements. Ensure programming equipment supports the Two-Wire Serial Programming Mode for ISP operations.

Configuration PROMs For FPGAs Selection Notes

Select this part when a 1-Mbit capacity is required for FPGA configuration. It is suitable for designs requiring dual voltage support or specific compatibility with older Xilinx and Altera architectures. Consider the 8-lead PDIP package constraints if surface mount alternatives are not feasible. Verify that the commercial temperature range meets the system environmental specifications.

Configuration PROMs For FPGAs Part Context

The AT17LV010 belongs to the AT17LV series of FPGA Configuration EEPROMs manufactured by Microchip Technology (formerly Atmel). This series provides cost-effective, non-volatile storage for FPGA bitstreams. The 010 designation indicates a 1-Mbit density within the family, which also includes smaller capacities like 65K and larger ones like 2M and 4M bits.

Configuration PROMs For FPGAs Replacement Considerations

AT17LV010-10PU is available in an 8-lead SOIC package. AT17LV010-10JC is available in a 20-lead PLCC package. These variants offer pin-compatible or functional alternatives depending on the required footprint.