CNY17-3XSM

Transistor, Photovoltaic Output Optoisolators Overview

The CNY17-3XSM is a surface-mount optoisolator featuring a transistor output with base access. It provides electrical isolation of 5300Vrms across a single channel. The device supports a maximum DC forward current of 60 mA and delivers an output collector current of up to 150 mA. Key performance metrics include a minimum current transfer ratio of 100% at 10 mA input, with a typical rise and fall time of 5 microseconds. It operates within a temperature range of -55°C to 100°C and utilizes a 6-SMD package.

Transistor, Photovoltaic Output Optoisolators Feature Summary

• Integrates an infrared emitting diode with a silicon NPN phototransistor for signal transmission.
• Provides high voltage isolation capability between input and output circuits.
• Includes a base terminal on the output transistor for external control or biasing.

Transistor, Photovoltaic Output Optoisolators Applications

• General-purpose digital signal isolation in industrial control systems
• Interface circuits for microprocessors and logic families
• Power supply feedback loops requiring galvanic separation

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify that the specific suffix 'XSM' corresponds to the required surface mount packaging and tape-and-reel configuration from Isocom Components documentation. Confirm RoHS compliance status and moisture sensitivity level requirements against project specifications before ordering. Ensure supplier sources official datasheets to validate pinout and thermal characteristics.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when a surface-mount form factor is required for space-constrained designs. The inclusion of a base pin allows for faster switching or linear operation compared to standard transistor outputs. Verify that the 5300Vrms isolation rating meets the safety standards of the target application environment.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the CNY17 series of optocouplers, which are widely used for general isolation purposes. The CNY17-3 variant specifically denotes the transistor output type with base access. Isocom Components manufactures this device as a surface-mount solution, offering an alternative to traditional through-hole DIP packages while maintaining similar electrical performance profiles.

Transistor, Photovoltaic Output Optoisolators Replacement Considerations

Publicly confirmed substitute part numbers include CNY17-1XSM from Isocom Components and CNY17-3S-TA from LITEON. Verify compatibility regarding pinout, isolation voltage, and current transfer ratios before substitution.