DDB2U60N12W1RFB11BPSA1

Bridge Rectifier Overview

The DDB2U60N12W1RFB11BPSA1 is a CoolSiC™ Schottky diode rectifier bridge module from the EasyBRIDGE family. It features a 1200 V repetitive peak reverse voltage and an RMS forward current of 60 A per chip, with a maximum surge forward current of 415 A at 25 °C. The device utilizes PressFIT contact technology and includes an integrated NTC thermistor rated at 5 kΩ at 25 °C. Thermal resistance from junction to heatsink is 0.713 K/W per diode. Operating temperature ranges from -40 °C to 150 °C, with a storage range of -40 °C to 125 °C. Insulation isolation test voltage is 3.0 kV RMS.

Bridge Rectifier Feature Summary

• Integrated CoolSiC™ Generation 5 Schottky diodes for high dynamic robustness
• PressFIT contact technology combined with rugged mounting clamps
• Built-in NTC temperature sensor for thermal monitoring
• Al2O3 substrate providing low thermal resistance

Bridge Rectifier Applications

• DC chargers for electric vehicles

Bridge Rectifier Procurement Notes

Verify component authenticity by cross-referencing the Data Matrix barcode on the module label against Infineon's official product identification standards. Ensure the ordering suffix matches the specific package variant required for your assembly process. Confirm that the supplier provides valid traceability documentation consistent with industrial application requirements.

Bridge Rectifier Selection Notes

Select this module when designing systems requiring high-frequency switching capabilities and elevated operating temperatures up to 150 °C. The integrated NTC sensor facilitates precise thermal management without external components. Verify that the PCB connector pins can support the specified continuous current limits per pin during installation.

Bridge Rectifier Part Context

This component belongs to the DDB2U series within the EasyBRIDGE portfolio, designed specifically for power conversion applications. It represents a compact solution integrating silicon carbide technology with standardized mechanical interfaces. The module is distinct from automotive-qualified parts as it lacks AEC-Q101 certification.

Bridge Rectifier Replacement Considerations

Direct substitutes include other EasyBRIDGE modules with matching voltage and current ratings, such as the DDB2U40N12W1RF_B11 or DDB2U80N12W1RF_B11. Ensure any replacement maintains compatibility with the PressFIT mounting system and NTC sensor specifications.

Bridge Rectifier FAQ

Is this module qualified for automotive applications?

No, the datasheet explicitly states that this product is not qualified according to AEC-Q100 or AEC-Q101 documents.

What is the insulation isolation test voltage?

The isolation test voltage is 3.0 kV RMS at 50 Hz for 1 minute.

How does the NTC thermistor behave at high temperatures?

The NTC has a rated resistance of 5 kΩ at 25 °C and follows a B-value characteristic defined by B25/50 = 3375 K.