DRA9113Z0L

Overview

The DRA9113Z0L is a PNP pre-biased digital transistor manufactured by Panasonic Electronic Components. It integrates base resistors R1 and R2, both specified at 47 kOhms, within an SSmini3 (SC-89/SOT-490) surface-mount package. The device supports a maximum collector-emitter voltage of 50 V and a continuous collector current of 100 mA. Key electrical characteristics include a DC current gain (hFE) of 80 minimum at Ic=5mA/Vce=10V, a saturation voltage of 250 mV maximum at Ib=300µA/Ic=10mA, and a transition frequency of 150 MHz. Power dissipation is rated at 125 mW with a collector cutoff current of 500 nA maximum.

Feature Summary

• Integrates dual base resistors for simplified circuit design
• Compact SSmini3 surface-mount packaging
• High-speed switching capability with 150 MHz transition frequency

Applications

• General-purpose switching circuits
• Driver applications for low-current loads
• Signal level translation interfaces

Procurement Notes

Verify the specific ordering suffix 'Z0L' against official Panasonic documentation to confirm tape-and-reel packaging specifications and RoHS compliance status. Ensure the component designation matches the exact SC-89 footprint requirements for your PCB layout. Cross-reference the datasheet revision date to validate parameter consistency before finalizing procurement orders.

Selection Notes

Select this component when a compact PNP digital transistor with integrated biasing is required. The 47 kOhm resistor values are suitable for standard logic interface applications. Consider the 100 mA current limit and 125 mW power rating for thermal management in dense layouts. The SSmini3 package offers space efficiency compared to larger SOT packages.

Part Context

This part belongs to Panasonic's series of pre-biased bipolar junction transistors designed for digital switching applications. These devices combine a BJT with internal resistors to reduce component count and assembly time. The DRA9113Z0L specifically utilizes the PNP configuration with defined resistance values for predictable base drive characteristics in consumer and industrial electronics.

Replacement Considerations

Publicly documented substitutes include Nexperia PDTA144EM,315. Verify pinout compatibility and electrical parameter equivalence, particularly hFE and Vce(sat), before substitution. Confirm that the alternative package matches the SSmini3 footprint constraints.