DTA143EUAT106

$0.19

Description：TRANS PREBIAS PNP 50V 0.1A UMT3
Series：-

SKU:686e4782d9a8 Category: Single, Pre-Biased Bipolar Transistors Brand: Rohm Semiconductor

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

Product Detailed Parameters

Description：TRANS PREBIAS PNP 50V 0.1A UMT3
Series：-
Mfr：Rohm Semiconductor
Package：Tape & Reel (TR),Cut Tape (CT)
Resistors Included：R1 and R2
Transistor Type：PNP - Pre-Biased
Current - Collector (Ic) (Max)：100 mA
Voltage - Collector Emitter Breakdown (Max)：50 V
Resistor - Base (R1)：4.7 kOhms
Resistor - Emitter Base (R2)：4.7 kOhms
DC Current Gain (hFE) (Min) @ Ic, Vce：30 @ 10mA, 5V
Vce Saturation (Max) @ Ib, Ic：300mV @ 500µA, 10mA
Current - Collector Cutoff (Max)：500nA
Frequency - Transition：250 MHz
Power - Max：200 mW
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：SC-70, SOT-323
Supplier Device Package：UMT3

Download product information

DTA143EUAT106

Overview

DTA143EUAT106 is a PNP digital transistor with built-in resistors manufactured by ROHM Semiconductor. It features a UMT3 (SOT-323) package with three terminals. Key electrical parameters include a collector-emitter voltage of -50 V, a collector current of -0.1 A, and a power dissipation of 0.2 W. The device incorporates an input resistance (R1) of 4.7 kΩ and an emitter-base resistance (R2) of 4.7 kΩ. The DC current gain (hFE) ranges from 30 to higher values. The component is supplied in taping format with a unit quantity of 3000.

Feature Summary

Integrates bias resistors to enable inverter circuit configuration without external input components
Utilizes thin-film resistors for complete isolation, allowing positive input biasing and minimizing parasitic effects
Simplifies design by requiring only on/off condition settings for operation

Applications

Inverter circuits
Interface applications
Driver circuits

Procurement Notes

Verify the supply status carefully as this specific part number may be designated as not recommended for new designs. Confirm availability through authorized distributors or direct manufacturer channels. Ensure that the ordering suffix matches the required packaging type. Cross-reference with replacement models like DTA143EU3 if new design support is required.

Selection Notes

Select this component for low-voltage PNP switching applications requiring integrated biasing. Verify that the -50 V collector-emitter voltage and -0.1 A current ratings meet the circuit requirements. Consider the UMT3 package size constraints. Check if the 4.7 kΩ resistor ratio suits the drive conditions. Evaluate alternative packages if higher thermal performance is needed.

Part Context

The DTA143EUA series belongs to ROHM's line of pre-biased transistors designed to simplify digital switching circuits. These devices combine a PNP bipolar transistor with internal bias resistors in a compact surface-mount package. The series is intended to reduce board space and component count compared to discrete resistor-transistor combinations.