DTB713ZMT2L

Overview

The DTB713ZMT2L is a PNP digital transistor from the ROHM DTB713Z series, featuring built-in biasing resistors. It operates with a supply voltage (VCC) of -30V and a maximum collector current (IC) of -200mA. The device includes an input resistance (R1) of 1.0kΩ and an emitter-base resistance (R2) of 10kΩ. Packaged in the VMT3 (SC-105AA) surface-mount format, it measures 1.2mm x 1.2mm with a thickness of 0.55mm. Key electrical characteristics include a DC current gain (GI) of at least 140 and a transition frequency (fT) of 260MHz.

Feature Summary

• Built-in thin-film biasing resistors enable inverter circuit configuration without external input components.
• Complete isolation between bias resistors allows for negative input biasing while eliminating parasitic effects.
• Simplified circuit design by requiring only on/off condition settings for operation.

Applications

• Switching circuits
• Inverter circuits
• Interface circuits
• Driver circuits

Procurement Notes

Verify the specific ordering suffix to confirm the package type and reel specifications. Confirm RoHS compliance status and lead times directly with authorized distributors or the manufacturer before placing orders. Ensure the component meets the required environmental standards for the intended application.

Selection Notes

Select this PNP digital transistor when a compact solution with integrated biasing is required for general electronic equipment. Consider the complementary NPN DTD713Z series if an NPN configuration is needed. Verify that the -30V supply voltage and -200mA current limits align with the system requirements.

Part Context

This component belongs to the DTB713Z series of digital transistors manufactured by ROHM Semiconductor. The series is designed for general-purpose applications in consumer electronics, communication devices, and OA equipment. It serves as a simplified alternative to discrete resistor-transistor combinations.

Replacement Considerations

The complementary NPN type in the same series is the DTD713Z. For direct replacement, verify pinout compatibility and ensure the substitute part matches the -30V supply voltage and -200mA current ratings. Check if the replacement offers similar R1 and R2 values.